Written as .16 caliber (notice the decimal point?), that would be a VERY tiny bullet- .16 inches in diameter. That is smaller than a metal BB- which is between .17 and .18 inches. Written as 16 caliber (no decimal point) it would refer to the length of a cannon barrel- 16 times longer than it is wide. But you may have caliber confused with gauge- shotgun shell sizes are usually given in gauges. A 16 GAUGE shotgun is about .69 caliber- or .69 inches across the shell. They are smaller than a 12 gauge, bigger than a 20 gauge (with gauge, smaller number means bigger)
16 inches is 40.64 centimeters.
Caliber is in reference to the diameter of the bullet. A .40 (which is what I have) is .40 inches in diameter. A .50 caliber is .50 inches in diameter (half an inch). So a caliber is the inches in diameter. Not including the 9mm which I cannot stand
Caliber refers to the diameter of the bullet. A 50 caliber bullet is .50 of an inch (half an inch) in diameter. It's also used to refer to a gun that shoots a 50 caliber bullet. The problem with the word "caliber" is that it has two different and confusing meanings. In small arms, "caliber" usually refers to the diameter of the bullet, NOT the casing, and is measured in inches (i.e. .50 caliber is 50/100ths of an inch, or a half-inch). [Note: your original question should be ".50" caliber, not "50" caliber.] The biggest problem with this usage is that it's not exact - the most common .50 caliber bullet (the .50 BMG of the Browning .50-caliber Heavy Machinegun) is actually .510 inches at the widest point. The other use of the word caliber is the ratio of the barrel bore (inside) diameter to its length. For instance, the huge 16" guns on the US's Iowa-class battleships are properly classified as 16"/50-caliber guns, which means that the barrel length is 15 times the bore length; thus, the 16/50 is 800 inches long (66 feet, 8 inches). While this usage of caliber is most common for cannon (and not small arms), it nonetheless can be found in discussions of rifles.
@ .05 inches
0.4444444
A 22 caliber bullet is 22/100 inches in diameter. A 7.62 mm bullet is 30 caliber or 30/100 inches in diameter there is no such thing as a 7.62 caliber bullet
87.5% increase.
There are 12 inches in a foot. That would give you 198 inches.
16*16*2=512
how much dirt is in a 16 inch hole
16 feet.
MM is a measurement in the metric system. Caliber is a measurement in inches.