0
Add your answer:
Earn +20 pts
Where does the cable clutch spring attach on a craftsman tractor?
the clutch cable attaches to the small pulley on left front of tractor mowing deck . there is a flat washer first than the cable than a locking pin to hold it hope this helps
What cards make the perfect dragon deck?
in my opinion, here are some of the best cards to go in a dragon deck: Level eater lightning vortex Level eater the tricky level eater future fusion Level eater five headed dragon Level eater the armed dragon cards Level eater masked dragon lord of D. shrink red eyes darkness metal dragon decoy dragon (AKA, The revised marshmalloon) the blue eyes cards quickdraw sychron As you can see, my favorite card in a dragon deck is level eater. In a dragon deck, it keeps comin' back, so you can tribute it to summon other monsters.
Poulan Riding mower 17hp 42 cut and a spring came off during mowing It obviously has to do with the blade deck as it now cuts to the groundAnyone know where spring goes?
I think your mower deck lift assembly spring has fallen off. The spring came off because the deck lift adjustment screw must have been unscrewed to the point that the deck fell off. Cut and paste this address into your browser address bar. You will need to prop the deck up put the spring back on and screw the adjustment screw back together. Keep in mind the adjustment screw may have fallen off completely. http://www.partstree.com/parts/?lc=poulan_weed_eater&mn=PP12542J+Tractor&dn=0825730010
Where does spring attach on cutting deck of John Deere stx38?
On the deck
How good are weed eater lawn mowers?
HAD MY WEED EATER LAWN TRACTOR FOR 9 YEARS NOW AND I HAVE NO COMPLAINTS I CUT A HALF ACRE LOT TWICE A WEEK IN THE SUMMER AND PLOW THE DRIVEWAY EVERY TIME IT SNOWS IN THE WINTER AND I HAVE NOT REPLACED ANYTHING ON IT YET I SHARPENED THE BLADES AND CHANGED THE OIL A FEW TIMES AND PAINTED THE MOWING DECK ONCE
How do you get mow blades off john deere tractor?
Hello, I need to know the tractor model number and deck size to answer your question..
How do you attach the mower deck to your Murray Garden Tractor?
reinstalling after blade exchange
How do you remove the deck on a John Deere stx38 lawn tractor?
Is your STX 38 a black deck or yellow mower deck color?? Bob Lituri lituri54@aol.com
What is the mower deck belt size on Craftsman lawn tractor model 944.607043?
Gates
How do you replace the deck belt on a john deere lt166 freedom 42 deck?
It depends on the Mower Deck you have. I have an LT166 with a Freedom 42" mulcher mower deck. To change the belt, I: 1) Lower the Mower Deck to the bottom position (on the lowest grass height) 2)Remove the front cotter pin and connector that locks the mower deck to the front of the tractor. The connector looks like a square loop with a tail. Slip the mower belt off the tractor (it should be loose and easy to do). 3)Remove the cotter pins that attach the lifter arms (on both sides) to the deck. 4)Remove the cotter pin that attach the blade brake to the tractor. Remove the blade brake shaft from the tractor (it should just slip off) 5) Raise the mower deck lever on the tractor -- the lifter arms should slide out from the mower deck. 6)Slide the mower deck out from under the tractor. 7) Remove the screws that hold the black plastic cover of the deck. 8) Find the spring tensioner on the side of the deck under the cover. Loosen the nut that keeps the spring tensioner tight, until the spring moves freely. 9) Loosen the nut on the FORWARD gear (the one the tensioner is connected to). That gear will then move so you can remove the belt. 10) Replace belt (Make sure the blades on the Freedom deck are aligned first!). Tighten spring tensioner. Tighten nut on forward belt gear. 11) Reverse steps 7,6,5,4,3,2,1
How do you change transmission belt on john deere d170 tractor?
Disingage the mower deck take off the mower deck look under neath their and replace the belt
How much does a john deere 316 lawn and garden tractor weigh?
820 lbs, without deck
