To disassemble a Smith and Wesson Model 411 .40 caliber handgun, first ensure the firearm is unloaded and the magazine is removed. Then, pull the slide back slightly and push the takedown lever located on the left side of the frame. Once the takedown lever is rotated, release the slide and pull it forward off the frame. Finally, remove the recoil spring and barrel from the slide to complete the disassembly process. Remember to follow all safety precautions and refer to the manufacturer's manual for detailed instructions.
Need to know which model. S & W made a lot of 45's.
You need the help of a gunmsith
Best left to a gunsmith.
Best left to a gunsmith.
If you go to You-Tube and type in disassemble of Smith and Wesson model 915;there should be a video of the steps needed to take down your smith and Wesson semi-auto 9mm.
Best to ask a gunsmith for help
Ask a gunsmith for help
check out: http://stevespages.com/page7b.htm
Recommend you ask a gunsmith for assisatance.
357 Magnum
Best to ask a gunsmith for help.
Best to ask a gunsmith for help