This really depends on where you are and a lot of other factors. A minimum acceptable flow rate for a family of 4 would be about 3 gallons per minute into the well. A "good" (good flow rate, we aren't taking about the quality of the water here, just the volume) well would produce 5 or more gallons per minute. According to my local well driller here in Western PA, a "gusher" is 20 gallons per minute coming into the well.
The average velocity of water in a pipe depends on the flow rate of the water and the cross-sectional area of the pipe. It can be calculated by dividing the flow rate by the cross-sectional area. The units are typically expressed in meters per second.
As the rate of flow decreases, the rate of deposition increases
30 litres per minute
The mass of water used in the first six minutes depends on the rate of flow of water. If we know the flow rate, we can calculate the mass using the formula: Mass = flow rate x time.
The average flow rate of a tap is typically around 2 gallons per minute (GPM) or 7.6 liters per minute. This can vary depending on the type of tap and water pressure in the system.
watermelon
Water flow rate half inch PVC pipe 65 psi?
The speed at which a volume of water moves through an aquatic ecosystem is called water flow rate.
A weir gauge is typically used to measure the flow rate of water in open channels such as rivers or streams. It works by allowing water to flow over a weir structure, and the height of the water level above the weir can be used to calculate the flow rate using established equations.
If you keep a spriknler flowiung for about 8 to 7 hours than the water will be done. Approximately 15 to 25 litres per shower.
It depends on the type of monkey