0
Check for leaks, make sure gaskets are sitting correctly. Make sure the pump has prime and the filter has filled. On an above ground pool this is easily done by placing the valve in the "backwash" position while the pump is off. The pump basked should fill with water. Then run the pump until the filter has filled and the water in the sightglass is clear. Turn off the pump, move valve to "filter" position and turn the pump back on. Never move valve while the pump is running. never run the pump for more than five seconds if water is not moving through it.
Add your answer:
Earn +20 pts
Hayward Pool Pumps?
form_title= Hayward Pool Pumps form_header= Swim a lot with Hayward pool pumps. What is the square footage of your pool?*= _ [50] Would you like to buy a new or used pump?*= () New () Used Are you willing to install the pump yourself?*= () Yes () No
How do you program a hayward variable speed pool pump?
how to program a pool vacuum
Does hayward heat pro work?
We've had many people buy a Hayward Heat Pro heat pump for their pool. Whether or not it is the best for your pool depends on your pool and where you live. Here's a link to the Hayward Heat Pro: http://shop.bluehaven.com/product/hayward-heat-pro/hayward-pool-heaters
What does IP mean on a Hayward pool heater gauge?
Input pressure.
Why does the pressure in my Hayward DE filter lose Pressure so quickly?
Have you maintained the water level in the pool? Could be a suction leak. Check the pump lid gasket for correct fit. Have you emptied the pump or skimmer baskets lately? Ken
What is Hayward?
Hayward is a pump, filter and general pool products manufacturer based in the United States. It is also a California city in Alameda county.
How to stop a Hayward pool pump from leaking water from bottom?
The mechanical seal probably needs to be replaced, or it may be the seal plate gasket. if it is the seal it will eventually ruin the pump motor if not replaced. Go to you tube for a how to videoPOOLCENTER.com - Hayward Pool Pump Impeller-Seal Replace 2
What is the best brand of pool pump to purchase?
Hayward, Sta-rite, Pentair and Water-Ace all have good track records. Hayward offers their Super Pump line which are some of the best pumps in the industry.
How do you know when you need new sand in a Hayward filter for an inground pool?
Depending on the size of the pool and the size of the filter and the amount of times you have to backwash, also if you have had a lot of rain then you may need to backwash more than usual. If you put the pool in and the filter and you know how old the sand is, if you are backwashing more than usual,change the sand. Also before you backwash check the pressure of the water going back into the pool, then backwash check the pressure again the pressure should for any size hayward pump push your hand away if it does not then change your sand.
Can I swap a Hayward D.E. pool filter pump motor with a Hayward Sand filter pump motor?
If, and only if, the horsepowers are the same and the fittings are the same size, yes. Don't change the horsepower of your pump without changing your filter without consulting a professional.
My Haywood EC 40 Pool Filter is not circulating water and has no pressure. The pump has water as indicated in the pump pot through the clear top and air relief valve was bled. What now?
broke impeler.. welcolme to hayward.. the new impelers are brass threaded so less apt to break..pool pump repair guy in longwood fl.
Where is the on off switch on a hayward pool pump?
It usually doesn't have one. Most pumps are controlled by an external switch. Usually a timer in a box near the pump.
