There are a number of ways you could remove stains from worms on a vinyl liner. You could use cleaners.
yes
Stainless steel is more resistant to stains,particularly rust stains,than white and enamel on the GE JP202.
A mixture of vinegar and water can help to remove hard water stains from a sink. For rust stains, using a paste made of baking soda and water or a commercial rust remover can be effective. Scrub the affected areas with a sponge or scrub brush, then rinse thoroughly with water.
Are you sure it's the dryer that is causing the rust stains? Perhaps you rubbed against something rusty. In any case, a little Naval Jelly should take care of the rust stains on your clothes.
Any good quality rust remover can be used for rust removal on many surfices.
You can remove rust stains from a toilet by applying a commercial rust remover or a mixture of vinegar and baking soda. Let it sit for a few hours, then scrub the stain with a toilet brush. For stubborn stains, you may need to repeat the process or use a pumice stone.
Assuming you're talking about rust stains on outdoor brick or concrete, you could get them from the sprinkler system if the home has well water. Also, areas (generally in the US South) with high concrentrations of red clay in the earth can look like rust stains as its the iron oxide (rust) in the red clay that makes the red color. Besides the obvious of rust coming from deteriorating metal from cars, lawnmowers etc., sometimes it emanates through old concrete slabs as the metal rebar in the concrete will rust and as it rains the water tends to pull the stains to the surface.
clorox..and a wirery bruch
You can use a mixture of vinegar and baking soda to safely remove rust stains from sinks. Simply create a paste with these two ingredients, apply it to the rust stain, let it sit for a few hours, then scrub the area with a sponge or brush. Rinse well with water afterwards.
Go to your local hardware store and ask them this question. There are all sorts of products to get rid of that rust (most of it) before going to the expense of putting a liner up. Answer I agree: fix the cause of the rust and remove the rust before attempting to cover it up. If not, you will have problems down the road.
You can remove rust stains from concrete by using a commercial rust remover or a mixture of vinegar and baking soda. Apply the solution to the stained area, scrub with a brush, and rinse thoroughly with water. Repeat as necessary until the stain is gone.