if you are talking about A/C, then the small connector is high pressure and larger connector is low pressure., low side 80 lbs .( this is static ), low side 35 lbs a/c running, high 200 to 300 lbs.
The common acceptable water pressure for a residential home is typically between 40-80 psi (pounds per square inch). Pressure outside of this range can cause issues such as leaks or damage to plumbing fixtures. It is important to check your water pressure periodically and adjust it if needed.
Static or pressurized tank?
100 lbs of steam. The volume that the steam will occupy will depend on the pressure.
By the amount of force acting on a surface. If you place a sheet of paper that is 1" by 1"(that is, one square inch) between you and a high pressure source you can measure how hard the pressure pushes on the paper. If it presses with the weight of 3 lbs, then the high pressure is 3psi(pounds per square inch) higher than the pressure around you. For low pressure the weight is negative.
The main principle of an autoclave is to use high temperature and pressure to sterilize equipment and materials by killing microorganisms such as bacteria, viruses, and fungi. The heat and pressure help to destroy the cell structure of these microorganisms, ensuring the items being sterilized are free of pathogens.
Given that this stands out a mile as almost certainly a school homework question, to answer directly would be to make me complicit in cheating. So I will tell you how to calculate it, which would appear to be the point of the question: 1) The relationship between depth and pressure of water is linear. 2) If water X ft deep exerts a pressure of P lb/in2, then water of Y ft deep will obviously exert a pressure of P(Y/X) lbs/in2 Given thats information you can now solve the original question.
108 cu. ft of water weighing 1080 lbs.
Oil pressure ( minimum amount ) is 6 LBS. at 1000 RPMs. 18 LBS. at 2000 RPMs. 24 LBS. at 4000 RPMs. more pressure is fine too.
No high pressure lbs require a specific ballasts to operate the bulb correctly
9 to 13 LBS. No less and no more are you will have starting are running problems.
Flywheel 79.7ft lbs - 85.5 ft lbs pressure plate 18.5 - 24.4 ft lbs