Whew, let's first convert to decimal numbers instead of feet and inches to make the math easier: 6 feet 5 inches = 6.42 feet (5 inches divided by 12 inches per foot = 0.42) 4 feet = 4 feet (that one was easy!) 6 inches = 0.5 feet (6 inches divided by 12 inches per foot = 0.5) Volume is length X width X depth. So, the volume of our pond is 12.84 cubic feet (6.42 X 4 X 0.5 = 12.84). 7.481 gallons fit in each cubic foot. So, our pond holds 96 gallons (96.05 to be more precise: 12.84 X 7.481 = 96.05). For any container, gallons = L X W X H (IN FEET) X 7.481 If you have a small container measured in inches, one extra step is required. As above, multiply L X W X H (IN INCHES). Divide the answer by 144, since there are 144 cubic inches in a cubic foot. THEN multiply by 7.481. So: gallons = (L X W X H IN INCHES / 144) * 7.481 You math whiz's can see there are several different ways to get here from there, if you can wrap your mind around a different formula, that's cool too.
Hi, It would help if you gave what units of measurement you have used in the first instance however I have made a couple of assumption and unless you are building an Olympic sized pool you will have measure in both feet for depth and centimetres for the length and width (Measure in millimetres or metres). A 1500mm(W) x 3000mm(L) x 1830mm (D) = 8.235m³ 8.235m³ x 1000 = 8,235 Litres of Water 8.235L x 0.22 = 1,811.70 Gallons Just in case I have misinterpreted and you are building a collosal sized pool here are the workings assuming you have given all measurements in the feet as the unit of measurement. 150ft(W) x 300ft(L) x 6ft(D) = 45.72m(W) x 91.44m(L) x 1.83m(D) = 7,650.57m³ 7,650.57m³ x 1000 = 7,650,570 Litres 7,650,570L x 0.22 = 1,683,125.40 Gallons Regards,
The pond holds a maximum of 1,795.32 gallons of water.
alot! 1,234,345.
If you fill it to four feet deep, the total is 10,408 gallons of water.
depends how much you fill it up
Depends on the depth of the water. If you go to four feet deep the total would be about 13,594 gallons.
To fill it all the way to the top (33") would require about 2,336 gallons of water.
To give you an idea, a 36-foot by 18-foot by 5-foot deep pool takes about 24,000 gallons of water to fill.
if it's 4 ft deep 21,139.948 gal.
To calculate the volume of dirt needed to fill a circular area, you first need to find the area of the circle (πr^2, where r is the radius). In this case, for a 14-foot circle, the radius is 7 feet. Once you find the area, you can calculate the volume of dirt needed based on the desired depth of filling the circle.
It would require 74,530 US gallons of water.
More information is needed in order to answer this question. The size of the pond, preferably in square meters.
First of all, how DEEP is it? The 24ft by 52in doesn't give me much of an idea of the dimensions. Submitted by lblack 3926
That would take 250 cubic meters of sand to fill as 10*5*5 is 250.