Wiki User
∙ 8y agoNot sure what too low means, But you need in an outdoor pool about 80 PPM of Stabelizer and in an indoor pool around 10 to 20 PPM. We have a new product called pool magic which each gallon adds 20PPM stabelizer per Regular cyanuric acid has a low pH and is very acidic and it can take 4 to 7 days to dissolve. This can cause damage to the pool surface or circulation system depending on the method of application. Until dissolved, dry cyanuric acid will not protect chlorine from UV loss. Natural Chemistry�s Instant Pool Water Conditioner is not an acid (it�s a salt) and has a pool friendly pH of about 8.0. Add it to the pool and an instant later it is in solution and ready to protect your chlorine.
Wiki User
∙ 8y agoWiki User
∙ 15y agoTry putting 1 pound per 3,000 gal then test until it is right
30 L
30 X 1000 = 30000 ml There are 1000 milliliters in 1 liter. One milliliter is 0.001 liter
3 L = 3 L 3L = 3000 mlThere are 1000 milliliters in 1 liter. One milliliter is 0.001 liter.
That is like asking, "What is the color of white?" The unit of measure in the metric system for a liter is a liter. Which is why we call it a liter.
green
The amount of salt in saltwater can vary depending on the location of the creek and other factors, such as evaporation and precipitation. On average, oceans have a salinity of about 35 grams of salt per liter of water. Therefore, a saltwater creek may have a similar concentration depending on its proximity to the ocean and other factors.
Only 1 percent of earths water is suitable to drink with 97 percent saltwater and 2 percent in icecaps.
Use the green color.
what color antifreeze goes into a 2000 ford Eddie Bauer explorer 5.0 ltr V8 -------------------------------------------------------------------------------------------------- In a 2000 Ford Explorer : According to the owners manual all engines ( 4.0 liter OHV , 4.0 liter SOHC , and 5.0 liter V8 ) came from the factory with ( green color antifreeze , meeting Ford specification ESE-M97B44-A )
It is not clear what you are asking. Perhaps this will help. !f you take a liter of pure fresh water and weigh it, it will weigh 1000 grams (a kilogram). If you then add 10 grams of salt to the water and stir the salt until it has all dissolved and measure the volume of the now salty water, the volume of the salt water will still measure exactly one liter. However if you weigh the liter of salt water it will weigh 1010 grams. This means that there are now more particles (atoms) occupying the same space - the DENSITY of the salt water is higher than the fresh water.
To make saltwater, the general ratio is about 1 part table salt to 32 parts water. This is equivalent to about 35 grams (or 1.2 ounces) of salt per liter (or quart) of water.
The Hummer H4 is a vehicle that is being specifically built for extreme off road driving. The vehicle will have full-time four wheel drive, 3.6 liter direct injection V6 engine, 35 inch wheels and stabilizer electronics.