0
How do you clear blue cloudy water from a black inground cement and fiberglass pool Have already used shocker algaside and clarifyer The cartrige is new this year?
Wiki User
∙ 14y ago
Cloudy water happens for MANY different reasons. It could be something as simple as high pH. Your first step should always be to take a water sample to the local pool store for analysis. Make sure they test for PHOSPHATES. Follow their directions and always balance your water first. Then move on to things like alagecides and clarifiers. Finally and just as important, is there plenty of circulation and good filtration. Just because the cartridge is new does not mean it's not already filthy. thepoolandspawarehouse.com
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
I am interested in in-ground fiberglass pools, is there a website where I can get further information on them?
Here is a company that specializes in building inground fiberglass pools and spas: http://www.vikingpools.net/
Is an inground vinyl or fiberglass salt water pool better for the Toronto area?
Inground vinyl is better, their is less exposed part to the oxigene, therefore, last longer.
Inground fiberglass pool skimmer leaks needs repair or replacement?
It would be easier to replace with a floating skimmer Check poolrite dragonfly
How do you fibreglass a inground pool liner pool?
Fiberglass pool shells are shipped in a single piece directly from the manufacturer. As a result, you don't actually linea pool with fiberglass the way you would with concrete or vinyl. Instead, installing a fiberglass pool simply means digging a hole in which to place the already completed shell.
What is a vinyl lined inground pool?
An inground pool is typically lined with either gunite (concrete), fiberglass, or vinyl. Gunite and fiberglass are roughly the same cost, whereas vinyl is considerably cheaper. With the lower price comes less durability, as vinyl lining has to be replaced every 8-10 years or so, whereas the other two can last for decades. Vinyl is also much easier to puncture or otherwise damage. That said, many people still prefer vinyl inground pools due to the lower cost.
Can cracked inground pools be repaired?
There are three main types of inground swimming pools: concrete, vinyl and fiberglass. All of which are prone to the occasional crack. Luckily for the homeowner such cracks can be repaired. If you are handy you can purchase a do it yourself repair kit at your local pool specialty store.
What's a good reference book or website for construction of an inground concrete block swimming pool?
Don't do it. Too many possibilities for leaks. Get Fiberglass or vinyl pool, learn to install that instead.
Who in Toronto builds inground swimming pools?
There are many people in Toronto who build in-ground swimming pools. These include Gib-Sans Pools, GibSan, San Juan Fiberglass, and Leisure Pools Online.
What is type of swimming pool has the easiest maintenance?
Inground concrete or fiberglass are the easiest pools to maintain. When you get into synthetic materials like vinyl and plastic, it's harder to find chemicals that will do the work without damaging the pool.
Inground Pools: How to Select the Right One?
Purchasing a pool is a large investment for any homeowner. There are several different types of inground pools available, so selecting the right one can be a challenge. Currently, fiberglass, concrete and vinyl liner inground pools are being sold. Comparing each type can make buying a pool much simpler. Fiberglass inground pools are a great choice for pool buyers. They are pre-constructed at a factory and shipped to the desired location in one piece. A customer simply selects their preferred size and shape from a catalog. Fiberglass pools are typically the most expensive pool on the market, but they last the longest. In the long run, a fiberglass pool will require less repair and fewer chemicals than other pool types. It usually takes only a few weeks to install a fiberglass pool from start to finish. The inside of fiberglass pools is smooth to the touch. For homeowners that desire more freedom designing their pool, then a concrete one would be the best option. Concrete inground pools are currently the most popular on the market. They are custom created by pool builders, which is great for customers who have a difficult yard shape. Concrete is usually less expensive than fiberglass, but requires more care over the years. Unlike fiberglass, a concrete pool is built in stages, so the construction time tends to be longer, usually one to three months. These pools come with a wide variety of finishes, from rough plaster to smooth tile. Less popular are vinyl liner inground pools. These pools are typically sold to the consumer in a kit form and put together by the owner. First, the ground must be excavated to fit the pool, and then it is placed inside. The sides of vinyl liner pools are constructed from steel. Once erected, they will be permanently supported by concrete. A vinyl liner is then spread over the sides and bottom. These pools are very popular in parts of the country where there are cold winters, as they can be easily drained and covered until the weather warms back up. Swimmers enjoy the smooth surface of the liner, but it can accrue more damage than other pools types.
Where do i buy a fiberglass swimming pool?
You would have to hire a fiberglass pool repair company to do the several layers of reconstruction of a fiberglass pool. The "gelcoat" is part of the surfacing proceedure and can not be purchased in a store or wholesale wharehouse.
How much does it cost to install a vinyl swimming pool versus fiberglass pool?
Well first of all there is no such thing as a fiberglass pool. You can have fiberglass walls instead of steel but your pool is still vinyl because you need a liner. These are the usual combinations of inground pools. Sand floor, steel walls, vinyl liner Sand floor, fiberglass walls, vinyl liner Vermiculite floor, steel walls, vinyl liner Vermiculite floor, fiberglass walls, vinyl liner Concrete floor, steel walls, vinyl liner Concrete floor, fiberglass walls, vinyl liner Concrete floor, concrete walls, no liner Concrete pools have to be painted with epoxy paint or if you want tile installed then usually you plaster over the concrete. Now a days 3 and 4 are the most common inground installs. 1 and 2 are usually pools that are 30 + years old although you can still have them done that way. In South Alabama the cost of a 20 *40 vinyl pool will cost around 18 to 22 thousand
