0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you measure how much water is in your pool?
Liters measure the volume of something so to measure the amount of water in the pool you'd use liters
How many gallons in a 20x10 pool?
10 gallons
What unit do you use to measure the amount of water in a pool?
/ idkthatswhy i'mSayingtohelpMe
If you want to measure the amount of water that can fill a swimming pool what standard unit of measurement would you use?
Liters or cubic meters are typically used to measure the volume of water in a swimming pool.
What is the best metric unit to measure the amount of water in the pool?
Liters (L) is the best metric unit to measure the amount of water in a pool as it provides a convenient measurement for large volumes of liquid.
Do you measure a pool using cubic inches or square feet?
The amount (volume) of water is measured in gallons or cubic feet.
Why would you measure a pool in cubic feet?
Measuring a pool in cubic feet allows you to determine the volume of water it can hold. This information is important for calculating the amount of chemicals, energy, or water needed to maintain the pool. It is also used to ensure proper filtration and circulation to keep the water clean and balanced.
When they messure the depth of a pool do they measure from the top of the pool or the top of the water?
They mean the top of the water
How do you measure the water evaporation from your swimming pool?
With a ruler.
How would you find the volume of a chair?
Well you could get a small pool or a large cylinder and fill it up with a specific amount of water [ex.350ml]. You have to make sure the water in higher than the height of the chair. Then put the chair in and measure the new amount of water. After, minus the new amount with the before amount and there's your volume(:
How could you find the volume of a person?
Fill a cylindrical pool (a pool with vertical sides) with water and measure the level of water in it. Sumberge the human body and measure the level of water. Volume of body = increase in volume in pool = area of cross section of pool * increase in height of water. The pool need not be cylindrical, but being so makes the calculations simpler.
How can you tell if your water level dropping is normal or a leak?
Fill a bucket with water, then mark the water level on the bucket with a waterproof marker. Set the bucket next to the pool. Next, mark the water level of the pool. After a couple of days, check the marks on the bucket and the pool. They should measure the same (having lost the same amount of water due to evaporation). If the pool level has dropped more than the level of water in the bucket, you have a leak somewhere. (By the way, make sure your dog hasn't drank out of the bucket, or pool!)
