0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can the water pump leak if you do a coolant flush?
Yes, the water pump can leak if you do a coolant flush.
What is the weep hole near the thermostat housing on a 2002 dodge intrepid 2.7 l for?
That is the water pump weep hole. If coolant is coming out, the water pump has failed.That is the water pump weep hole. If coolant is coming out, the water pump has failed.
Why would coolant be dripping at the back of the engine straight in middle of the frame from the drivers door?
water pump may need to be replaced
Where is the water pump to fill up in a 1996 Saturn sl2?
You don't "fill up" the water pump. The water pump is just a pump that moves coolant throughout the engine cooling system. You add coolant at the radiator or the coolant recovery tank.
Water pump not circulating coolant?
If the pump is not circulating coolant insure that the thermostat is not stuck closed. If the thermostat is ok then the pump will have to be replaced.
What does it mean when coolant leaks from the water pump?
The water pump is worn out. Time for replacement.
What causes water to get in water jacket with knock sensor?
Assuming you mean coolant (shouldn't run straight water), the coolant is pumped through the water jacket by means of the water pump. This is part of the cooling process for the engine. The knock sensor happens to be where the drain plug used to be.
Does a 95 Dodge Ram have a coolant lift pump for low speed coolant flow?
No. The water pump is the only coolant circulation device.
Where is the coolant temperature sensor for the fans on a 1998 camaro 5.7l?
It is the sensor located in the water pump. It is a 2 prong plug, screwed straight into the front of the water pump. The other sensor that is located in the cylinder head is for your gauge.
Do you have to drain the engine coolant before replacing a water pump on a 96 cav 2.2 I mean is the coolant going to pore out after I take the pump off?
Most, if not all, the coolant in the radiator reservoir will pour out when you pull the water pump. Drain the radiator and save the coolant (if you plan to re-use it) before removing the water pump.
Removing the water pump from a 1987 Chevy Celebrity 2.5l?
To remove the water pump from a 1987 Chevy Celebrity: 1. Using a suitable container drain the coolant to a point below the water pump. 2. Release the tension on the serpentine belt. Remove the belt from the water pump pulley and position the belt away from the water pump. 3. Using a proper puller remove the pulley from the water pump. 4. Remove the bolts from the water pump. The water pump should pull off at this point To reinstall a new pump: 1. Clean the old gasket off the water pump mount point. 2. Using a new gasket and any sealer desired bolt the new pump in place. 3. Using the install tool press the pulley on the new pump. 4. Put the serpentine belt back in place. 5. Refill with coolant. Check for leaks
What is a water pump in a car?
In a car the water pump circulates coolant through the engine and to the radiator.
