0
After opening your pool the chlorine level was fine but the pH was very low even after adding soda ash what should you do to raise the level?
Wiki User
∙ 8y ago
make sure your alkalinity is correct first before adjusting the PH. you can use alkalinity up to increase this.
Or
Use baking soda. Your level of alk. should be between 80 &120; pH =7.4 - 7.8. You need to check these levels about every 20 min. & keep adjusting until levels are close to the minimums above. Check next day to see if chemistry has stabilized. Adjust as need.
k
:
1. Get your alkalinity 80-100ppm, not higher.
2. pH is 7.6-7.8, and no lower
3. There's a technique you need to use to raise/lower your pH/alkalinity, but first test your fill water, both pH and alk.
Most water companies run their pH about 7.2. If it's there, leave it alone because it will come up naturally as the pools gets used.
Go to the links below.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
How quickly can you swim after adding chlorine to a pool?
You should not re-enter the pool until the chlorine level is 3ppm or less on your test strip, however long that takes. Chlorine is a known carcinogen and high chlorine levels are linked to many respiratory diseases.
How can i get my chlorine level up?
To increase the chlorine level in your pool, you can add chlorine tablets, granules, or liquid chlorine according to the manufacturer's instructions. It's important to regularly test the water to ensure the chlorine level stays within the recommended range for safe swimming. Avoid adding too much chlorine, as this can lead to irritation and other issues.
What should chlorine level be?
99.99 percent
When adding chemicals what should the pool be on?
When adding chemicals to a pool, it is important to ensure that the pool's water is within the recommended pH and chlorine levels. The pH level should typically be between 7.2 and 7.6, and the chlorine level should be between 1-3 parts per million (ppm) for a standard swimming pool. Follow the manufacturer's guidelines and test the water regularly to maintain the correct chemical balance.
When opening a pool is it better to the pH or the chlorine right first?
Adjusting the chlorine content will almost certainly affect the pH, so it would be simpler to get the chlorine level correct first and then titrate to the proper pH.
Why would chlorine levels rise in a pool without adding chlorine?
Chlorine levels in a pool can rise without adding chlorine if there is a high level of sunlight exposure, which can break down the chlorine molecules in the water and release more free chlorine. Another reason could be a build-up of organic materials like leaves, dirt, or sweat, which can react with the existing chlorine and cause it to become less effective, leading to a higher recorded level.
How long wait chlorine in pool?
Chlorine should be allowed to circulate in a pool for at least 8 hours for proper disinfection. The exact time may vary depending on the size of the pool and the chlorine levels needed. It's best to check the chlorine levels using a test kit before allowing people to swim in the pool.
Can swimming in a chlorine pool affect a new earlobe piercing?
If the chlorine level is correctly maintained this should not be a problem.
Can algaecide interact with chlorine thereby reducing the level of free chlorine in a swimming pool?
Yes, certain algaecides can interact with chlorine and decrease its effectiveness in maintaining free chlorine levels in a swimming pool. It's important to carefully follow the instructions for both chemicals and avoid adding them at the same time to prevent unwanted reactions.
You have low chlorine level in above ground pool?
If you are getting a low reading of chlorine in your above ground pool, you should add the appropriate amount of chlorine to get it back to the correct level. This is important to keep your pool running at maximum abilities.
What procedure is used to determine the level of combined chlorine in water?
The level of combined chlorine in water is typically determined using a test kit that measures the total chlorine and free chlorine levels. By subtracting the free chlorine level from the total chlorine level, the level of combined chlorine can be calculated. This measurement is important in determining the effectiveness of water treatment processes.
How can the chlorine level be lowered with salt chlorinator?
To lower the chlorine level with a salt chlorinator, you can reduce the output setting on the chlorinator or run the pool pump for a shorter duration to generate less chlorine. You can also dilute the water by adding fresh water to the pool. As a last resort, you can shock the pool with a non-chlorine shock treatment to reduce the chlorine level.
