i sujest you go to see your local doctor or a hospital if it does start to affect him they are the best people to talk to
chips/shavings/what-have-you...of WOOD(GASP!).
The density of wood chips can vary depending on the type of wood and how they are packed. On average, the density of wood chips ranges from 7-15 pounds per cubic foot.
I think only sand should be on playgrounds because sand is the best thing to fall on.It is very safe.By:TURTLE:D SCENE KID-ME!
Paper, but not wood chips.
Lots of tiny, bright yellow spots on wood chips is likely mold. The area where the wood chips are is likely damp.
To separate sand from sugar and wood chips, you can use a combination of sieving and filtration. First, sieve the mixture to separate sand from sugar and wood chips. Then, use filtration to separate sugar from wood chips, as sugar can be dissolved in water while wood chips cannot.
Having a low density wood chips float on water.
When the mixture of marbles and wood chips is added to the water, the marbles will sink to the bottom of the container since they have a higher density than water. The wood chips will float on the surface since they have a lower density. The marbles will settle at the bottom, and the wood chips will remain floating on the water.
The density of green spruce wood chips can vary depending on factors such as moisture content and size of the chips. On average, the density of green spruce wood chips is around 400-500 kg/m^3.
The rule of thumb for wood chips is that they weighs 550 pounds per cubic yard. So a ton of wood chips would equal about four cubic yards.
Wood chips come in many flavors but the most popular are hickory, oak,pecan and mesquite flavored. Also, the more wood chips you use, the greater the flavor.