Depends on if it is a just a shower or a shower/tub combo. There is no set heigth or industry standard. If it is for a shower only and to be used by adults only it can go as high as 48" but if children are using it you may think about lowering it from 36" to 44". If it is being used for a tub/shower it needs to be at a height that can be easily reached from a sitting position in the tub but not to low for shower use. Hope this helps.
Usually in the centre. Check with brand and model of the shower to be installed for exact measurements or check the rough-in manual for the EXACT shower for proper measurements.
The rough framing dimensions for a 48x48 shower will be 48x48 because rough framings are built according to exact maximum dimensions of a pan and tile.
The minimum distance required is 15" either side/ that is minimum.
A shower rough-in usually refers to the distance from the wall to the center of the shower drain , measured out away from both walls in a shower to the center of the drain. It also maybe referring to the height and the center line of the placement of the shower valve.
An estimate is a rough measurement that involves using past experiences and intuition to make an educated guess about the size, length, or weight of an object. It is useful when precise measurements are not necessary or possible.
pumice. take a shower or a bath and pumice them. it helps.
BY reading and following the rough in measurements get a plumber to come and give you a quote!
You have to remove the ceiling below to rough in a new shower above.
Cut them off.
Yes after you go the pool you need to take a shower but when you take a shower scrub your hair really really good using the Shampoo&Conditioner method
If it is a manual trans.take the screws out holding the shift lever boot on. Slide the boot up the gearshift. there will be a bolt holding the lever on, take that out and pull on the lever. you may have to get a little rough with the lever to get it to come off once the bolt is out.
300