0
Add your answer:
Earn +20 pts
What is the density of PVC pipe?
1.40 g/cm³
Water flows through a circular pipe of internal diameter 3cm at a speed of 10 cms If the pipe is full how much water flows from the pipe in one minute?
Cross-sectional area of pipe is π(1.5)² = 7.07 cm² that means the flow is 10 cm/s x 7.07 cm² = 70.7 cm³/s 70.7 cm³/s x 60 sec = 4240 cm³ or 4.24 Liter
How many gallons in a 2 pipe 1 foot long?
The answer will depend on whether it is a 2 inch pipe or a 2 cm pipe or a 2 foot pipe or whatever.The answer will depend on whether it is a 2 inch pipe or a 2 cm pipe or a 2 foot pipe or whatever.The answer will depend on whether it is a 2 inch pipe or a 2 cm pipe or a 2 foot pipe or whatever.The answer will depend on whether it is a 2 inch pipe or a 2 cm pipe or a 2 foot pipe or whatever.
How much water will a 1 meter length 150mm PVC pipe hold?
Assumed that 150mm is the diameter of the PVC pipe, then radius is 75mm and the length is 1 meter or 1000mm. The volume of the cylinder is pi x r x r x h and in this case it would be 3.1415 x 75 x 75 x 1000 = 17670937.5 cubic mm which is 17670.9375 cubic cm which is 17.6709375 liters
What full form of cm?
Depending on the subject matter cm is usually the abbreviation of centimetre(s)Chief ministerCentimeter or Chief Minister
What is the full form of CML?
CM/L no:- Certificate of Manufacturing License.( BIS License)
What is th density of PVC?
The density of PVC (polyvinyl chloride) typically ranges from 1.3 to 1.4 g/cm^3.
Radius of pipe is 7.5cm and length is 850cm what is the volume of pipe?
150,207.75 cubic cm
Suppose you have a pipe with a circumference of 8 cm and length 30 cm and that 8 turns of a wire are wrapped around the pipe What is the length of the wire?
Take the circumference (8 cm) times turns of wire (8) equals 64 cm
What is pipe circumference 19.5 cm in inches?
The circumference of a pipe measuring 19.5 cm is approximately 7.68 inches when converted using the conversion factor of 1 cm = 0.393701 inches.
How made to GI earth-pit with salt and coal?
To make a GI earth pit with salt and coal, start by digging a pit in the ground. Line the pit with a layer of salt, followed by a layer of coal. Place the GI (Galvanized Iron) rod in the center of the pit and cover it with more salt and coal, alternating layers until the pit is full. This setup can help improve grounding for electrical systems.
Suppose you had a pipe with circumference 8cm and length 20 cm and that 8 turns of a wire are wrapped around the pipe. What is the length of the wire?
56.60
