In plumbing, a Fixture Unit (FU) is equal to one cubic foot of water per minute. A Fixture Unit is not a flow rate unit but a design factor. This is roughly 7.48 gallons per minute, or 28.3 liters per minute.
There is no answer as the units are incompatible and therefore not convertible. In plumbing, a Fixture Unit is equal to one cubic foot of water drained in an 1 1/4 pipe over one minute. A Fixture Unit is not a volume or a flow rate unit but a design factor.
A fixture is 7.48 gallons which is equal to 1 cubic foot of waterAlso a fixture unit in storm drainage is roughly 3 square feet depending on pitchTo convert sanitary /waste to storm fixture units for a combined system one has to do interpolation combining all the GPM flow expected from a 10 year frequency
A light fixture/fan unit can run anywhere from 50-200 dollars
One fixture unit
This means that the fixture unit assigned to each fixture is 1.5. Fixture units are a standardized measure used in plumbing design to calculate the flow rate and drainage capacity of fixtures. Different fixtures are assigned different fixture unit values, and these values are used to determine the total load on a plumbing system.
A fixture is 7.48 gallons which is equal to 1 cubic foot of waterAlso a fixture unit in storm drainage is roughly 3 square feet depending on pitchTo convert sanitary /waste to storm fixture units for a combined system one has to do interpolation combining all the GPM flow expected from a 10 year frequency
Got no clue
3 gpm
What is the condendsate in GPM flow and what tonnage is the unit
Dranage system of india
A Fixture unit is 7.48 gallons (1 cu ft) or 3 sq ft of drainage Or a pump discharging 1 GPM = 1 FU When in doubt of a proper answer ask a Master plumber of a class A journeyman