0
What domain controllers can be joined to a forest that is currently set at the Windows Server 2008 forest funtional level?
Add your answer:
Earn +20 pts
What do you do to install a new Windows 2003 DC in a Windows 2000 AD?
If you plan to install windows 2003 server domain controllers into an existing windows 2000 domain or upgrade a windows 2000 domain controllers to windows server 2003, you first need to run the Adprep.exe utility on the windows 2000 domain controllers currently holding the schema master and infrastructure master roles. The adprep / forestprer command must first be issued on the windows 2000 server holding schema master role in the forest root doman to prepare the existing schema to support windows 2003 active directory. The adprep /domainprep command must be issued on the sever holding the infrastructure master role in the domain where 2000 server will be deployed
Which domain functional level can support both windows 2003 domains and windows nt 4 domains A. Windows 2000 mixed B. Windows 2000 native C. windows 2003 interim D. windows server 2003?
Windows Server 2003 interimSupported domain controllers: Windows NT 4.0, Windows Server 2003Supported features: There are no domain-wide features activated at this level. All domains in a forest are automatically raised to this level when the forest level increases to interim. This mode is only used when you upgrade domain controllers in Windows NT 4.0 domains to Windows Server 2003 domain controllers.
What is associated with installing the first domain controller in a forest of 2008?
Considerations when Installing a new Windows Server 2008 forestWhen you install AD to create the first domain controller in a new Windows Server 2008 forest, you must keep the following considerations in mind: You must make forest and domain functional level decisions that determine whether your forest and domain can contain domain controllers that run Windows 2000 Server, Windows Server 2003, or both. To read more about forest and domain functional levels please refer to the links below.Domain controllers running the Microsoft Windows NT Server 4.0 operating system are NOT supported with Windows Server 2008.Servers running Windows NT Server 4.0 are NOT supported by domain controllers that are running Windows Server 2008, meaning you MUST have additional DCs running Windows 2000/2003 to support older NT 4.0 servers.The first Windows Server 2008 domain controller in a forest must be a global catalog server and it cannot be an RODC.
What is Dcdiag?
This command-line tool analyzes the state of one or all domain controllers in a forest and reports any problems to assist in troubleshooting. DCDiag.exe consists of a variety of tests that can be run individually or as part of a suite to verify domain controller health.Tool locationThe DCDiag command-line tool is included when you install Windows Server 2003 Support Tools from the product CD or from the Microsoft Download Center(http://go.microsoft.com/fwlink/?LinkId=100114). For more information about how to install Windows Support Tools, see Install Windows Support Tools(http://go.microsoft.com/fwlink/?LinkId=62270).Tool requirementsExcept as noted below, all commands in DCDiag can be run on Windows XP Professional and Windows Server 2003 family (member servers and domain controllers).The new DCDIAG /TEST:DNS command can validate DNS health of Windows 2000 Server (SP3 or later) or Windows Server 2003 family domain controllers when run from the console of Windows XP or Windows Server 2003 member computers or Windows Server 2003 domain controllers.
What is windows server 2008 server?
Windows Server 2008 is the most recent release of Microsoft Windows' server line of operating systems. Released to manufacturing on 4 February 2008 and officially released on 27 February 2008, it is the successor to Windows Server 2003, released nearly five years earlier. Like Windows Vista, Windows Server 2008 is built on the Windows NT 6.0 kernel. A second release, named Windows Server 2008 R2, is currently under development.
What of windows server 2008 allows enterprises to migrate their down-level active directory domain controllers gradually?
Functional levels
What is server 2008?
Windows Server 2008 is the most recent release of Microsoft Windows' server line of operating systems. Released to manufacturing on 4 February 2008 and officially released on 27 February 2008, it is the successor to Windows Server 2003, released nearly five years earlier. Like Windows Vista, Windows Server 2008 is built on the Windows NT 6.0 kernel. A second release, named Windows Server 2008 R2, is currently under development.
How you can raise domain functional and forest functional level in Windows Server 2008?
Raise the Domain Functional Level for 2008 server Applies To: Windows Server 2008, Windows Server 2008 R2 When you install Active Directory Domain Services (AD DS) on a server running Windows Server 2008 R2, a set of basic Active Directory features is enabled by default. In addition to the basic Active Directory features on individual domain controllers, there are new domain-wide and forest-wide Active Directory features available when all domain controllers in a domain or forest are running Windows Server 2008 R2. For the new domain-wide features to be enabled, all domain controllers in the domain must be running Windows Server 2008 R2, and the domain functional level must be raised to Windows Server 2008 R2. Membership required: Domain Admins or Enterprise Admins To raise the domain functional level 1.Open Active Directory Domains and Trusts. To open Active Directory Domains and Trusts, click Start, click Administrative Tools, and then click Active Directory Domains and Trusts. 2.In the console tree, right-click the domain for which you want to raise functional level, and then click Raise Domain Functional Level. 3.In Select an available domain functional level, do one of the following: * To raise the domain functional level to Windows Server 2008, click Windows Server 2008, and then click Raise. * To raise the domain functional level to Windows Server 2008 R2, click Windows Server 2008 R2, and then click Raise. Caution Do not raise the domain functional level to a later version (such as Windows Server 2008 or Windows Server 2008 R2) if you have or will have any domain controllers running earlier versions of Windows Server. Important After you set the domain functional level to a certain value, you cannot roll back or lower the domain functional level, with one exception: when you raise the domain functional level to Windows Server 2008 R2 and if the forest functional level is Windows Server 2008 or lower, you have the option of rolling the domain functional level back to Windows Server 2008. You can lower the domain functional level only from Windows Server 2008 R2 to Windows Server 2008. If the domain functional level is set to Windows Server 2008 R2, it cannot be rolled back, for example, to Windows Server 2003.
What are attributes on a windows server 2003?
Answer: Supported domain controllers: Windows Server 2003 Supported features: domain controller rename, logon timestamp attribute updated and replicated. User password support on the InetOrgPerson objectClass. Constrained delegation, you can redirect the Users and Computers containers.
Which operating systems can be upgraded to windows server 2003 enterprise edition?
Windows 2000 Server and Windows NT Server 4.0 (SP5).
How you can raise domain functional level of 2003 server?
server 2003 Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2 After you upgrade all Windows NT 4.0-based domain controllers in a domain to Windows Server 2003, you can raise the functional level of each domain in the forest to Windows Server 2003. Before you raise the domain functional level, however, you must ensure that no Windows NT 4.0-based domain controllers remain in the domain. Warning * If Windows NT 4.0-based domain controllers are running in a domain when you raise the domain functional level to Windows Server 2003, they will no longer be able to communicate with the new Windows Server 2003 domain controllers and will not receive necessary updates. Use the following LDAP query to identify any Windows NT 4.0 domain controllers remaining in the domain. Run the LDAP query against the Domain container in Active Directory Users and Computers. If you have not manually changed the value of the operatingSystemVersion attribute of the computer object, this query is conclusive for domain controllers running Windows NT 4.0. You must be a member of the Domain Admins group to run the following query. To identify Windows NT 4.0-based domain controllers in a domain 1. From any Windows Server 2003-based domain controller, open Active Directory Users and Computers. 2. If the domain controller is not already connected to the appropriate domain, connect it to the domain as follows: a. Right-click the current domain object, and then click Connect to domain. b. In the Domain dialog box, type the DNS name of the domain that you want to connect to, or click Browse to select the domain from the domain tree, and then click OK. 3. Right-click the domain object, and then click Find. 4. In the Find dialog box, click Custom Search. 5. Click the domain for which you want to change the functional level. 6. Click the Advanced tab. 7. In the Enter LDAP query box, type the following, leaving no spaces between any characters (the query is not case-sensitive): (&(objectCategory=computer)(operatingSystemVersion=4*)(userAccountControl:1.2.840.113556.1.4.803:=8192)) 8. Click Find Now. This produces a list of the computers in the domain that are running Windows NT 4.0 and functioning as domain controllers. A domain controller might appear in the list for any of the following reasons: * The domain controller is running Windows NT 4.0 and must be upgraded. * The domain controller has been upgraded to Windows Server 2003, but the change has not replicated to the target domain controller. * The domain controller is no longer in service, but its computer object has not been removed from the domain. Before you can change the domain functional level to Windows Server 2003, you must physically locate any domain controller in the list, determine its current status, and either upgrade or remove the domain controller as appropriate.
What is the difference between a client and a server?
Client server A Computer Joined In The Domain With Client OS like Windows XP, Windows vista, Windows 7 etc. and Member server A Computer Joined In The Domain With Server OS like windows server 2000,Windows Server 2003,windows server 2008
