0
Either the monitor or video card are bad or the wrong software driver is being used for the video card or the refresh rate is out of range for the monitor. How to resolve it: Plug in a different monitor swap the video card into another PC or try a new one make sure the correct software driver is being used for the video card.
Or there is simply too much dust in the video card fan. Q-tips may be the solution.
Add your answer:
Earn +20 pts
Why time base circuit is used in a CRO?
It is used as the horizontal deflection voltage of the CRT.
Vertical black lines on my crt monitor?
u can buy them at best buy.
Is CRT monitors better or LCD?
In my opinion, the LCD definitely is better than the CRT, based on the simple fact of clarity and color. While CRT is less expensive than an LCD, it also causes increased eyestrain when viewing a computer screen for a long period of time.
What is a flyback?
A type of high voltage transformer. Their most common use was in CRT based TVs & computer monitors to generate the anode high voltage and horizontal sweeps.
What are the 4 parts of a cathode ray tube?
four parts of CRO: 1-crt 2-horizontal section 3-vertical section 4-power supply
How your CRT monitor is recycled?
They take them apart and then melt down the parts for lead and copper.
What are retrace lines on a tv?
Why TV Retrace Lines OccurI am no expert, but I will try to explain A standard TV screen is made up of 480 lines from top to bottom. Retrace lines will only happen on a TV with a regular Picture tube (known as a CRT), they will not happen on a LCD or Plasma screen. So before I say how retrace lines happen, lets first get little understanding of how the TV puts an image on a CRT. The lines on a CRT are made by a device in the back (known as the neck)of the picture tube called the electron gun. By use of magnetic fields controlled through a device called a Yoke mounted on the neck of the CRT. Now the electron beam emitted by the electron gun is made to go across the front of the CRT screen that is coated with a layer of Phosphor that glows when the electron hits it. When that beam starts at one side reaches the opposite side of the picture tube it has to quickly return back to that first side in order to make that next line. On a standard TV, in order to make the image of a single frame, it creates this line across the screen 240 times from top to bottom, it then returns to the top and starts down again with a second set of 240 lines that fill in between the first 240 lines to create one full frame image of 480 lines, and it does this 30 times a second. Now the retrace lines you are asking about happens when a circuit in the TV known as the Blanking Circuit, fails causing the Beam that is moving from the bottom to the top of the screen to become visible.
When was CRT Lanaudière created?
CRT Lanaudière was created in 2002.
What causes a computer monitor to roll?
Its roundness and lack of corners. Actually, if you are discussing a CRT monitor, it may need to be adjusted. There is a control called horizontal hold, and it is often in the back, though it could be in the front inside a little door. If the screen is really corrupted and going sideways or more corner to corner, you would adjust the vertical hold control.
What is the difference in led lcd and crt?
CRT is cheaper than LED.
When did Calvary - CRT station - end?
Calvary - CRT station - ended in 1931.
When was Calvary - CRT station - created?
Calvary - CRT station - was created in 1908.
