Yes. If a water pump is leaking, it leaks anti freeze. Anti freeze, (coolant) can also leak from the radiator, or from water hoses.
You have to drop the water level below the piping of the pool, then take compressed air and blow out the lines, normally you disconnect the pump and filter and blow the water lines from the direction of the filter and pump back towards the pool cap the pool inlets and outlets, and put the pink R. V. anti freeze in the lines so that they do not crack.
Secure the water pump with the retaining bolts. Connect the water pump hose. Put the belt on to the water pump. Fill your cooling system with anti-freeze.
You answered you own question: at freezing. At or near 32 degrees F your pump should be turned to keep water moving. moving water doesn't freeze. It is important that any exposed pipes, filter and pump have moving water at freezing as this water will freeze first and cause the item to crack. That's expensive as compared to the few cents it costs to operate the pump. Water starts to freeze at 32 degrees. So it best to turn pump on at approx. 35 degrees & leave on until the tempt. rises to 35
NoNo
Secure your 1994 Toyota water pump with the retaining bolts. Connect the water pump hose. Put the water pump belt on to the water pump pulley. Fill the cooling system with anti-freeze.
yes and no, if the water pump seals are bad antifreeze will leak from the weep hole on the water pump, but it is possible for the pump to go bad and not leak at all.
my water pump just went out and i thought that the squealing was my belt but turned out to be my water pump and the fact it was leaking anti-freeze. so yes
anti freeze can be leaking from a worn freeze plug, a leaky head gasket, a water pump gasket,a bad water pump. to answer properly ,u need to supply more information
The water lines on the 95 Chevy Caprice include the lines that lead from the window washer fluid to the windshield. There are also water lines that lead to the water pump on the Caprice.
Drain the anti-freeze from the 1997 Dodge Ram 1500 cooling system. Remove the water return hose from the water pump. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
When the water pump goes it leaks water from the weep hole, usually located below the pully shaft. Just look for the anti freeze with the system full and under normal operating pressure. U should find the leak pretty quick.