0
If the water valves under your bathroom sink will not turn is there anything you can do to loosen them without damaging the pipe?
Add your answer:
Earn +20 pts
What is a solvent formulated to loosen material that is sealed or glued?
An adhesive solvent is formulated to loosen and dissolve adhesives used in sealing or bonding materials together. It helps weaken the bond between the surfaces, making it easier to separate them without damaging the materials.
Is it bad if you adjust the saddle on your guitar without loosening the string first?
Yes, always loosen the strings on your guitar before you adjust anything directly related to the strings, or touching the strings.
How do i remove a pulley from a shaft?
To remove a pulley from a shaft, you first need to loosen any set screws or locking mechanisms securing it in place. You can then use a pulley puller tool or a gear puller to apply force evenly and remove the pulley from the shaft without damaging either component. If the pulley is stuck, applying penetrating oil and gently tapping it with a mallet can help loosen it before attempting removal.
What to do with Congestion in babies?
If you have a baby with congestion you should sit in the bathroom with the door closed and the hot shower on. The steam will loosen up the mucus causing the congestion.
What solution that can use during tracheal suctioning to loose the secretion?
Normal saline solution is commonly used during tracheal suctioning to help loosen secretions and make them easier to remove. It is a sterile and isotonic solution that can help facilitate the suctioning process without damaging the airway.
How do you remove a lug nut when the wheel stud is also turning?
turn the car off Don't jack up the wheel until you loosen the lug nuts. Find some one who is good with a cutting torch, they can cut that nut off without damaging the rim. You will have to replace that stud or maybe the hub assembly.
Do you need to use a torque wrench to loosen retractor seatbelt bolt on vw caravelle?
You don't use a torque wrench to loosen ANYTHING. -It is only for tightening nuts and bolts to the correct torque.
What is a keyless drill chuck?
A chuck that has a construction that allows you to tighten or loosen it without the use of a key.
Can someone fairly easily loosen your motor mounts on your parked car?
Anything is possible but this would be extremely hard to do.
How do you remove a broken chrome bathroom sink drain pipe from the brass pipe in the wall?
There should be a nut around the chrome pipe holding it to the brass. Loosen the nut and pull the chrome pipe out.
How do you loosen stubborn flare nuts without damaging the brake line?
Use a line wrench and nothing else. Sometimes P'Blaster or penetrating oil can help. If you're good at torching things without melting them, you might heat the fitting and move it back and forth in very small increments with the line wrench. WARNING!! DOT3 Brake fluid is flammable and will boil even before igniting. DO NOT ATTEMPT to heat the fittings unless you have the proper protective equipment.
How do you loosen the knot on a duncan butterfly yoyo?
To loosen the knot on a Duncan Butterfly yo-yo, first remove the string from the yo-yo. Then unravel the knot by gently pulling it apart until it comes loose. Be careful not to pull too hard to avoid damaging the string or the yo-yo.
