They are called tank bolts.
I find it easiest to bolt the tank to the toilet first, then sit the whole unit on the flange.
seal to stop water from runing into tank located between tank and bowk
A raw egg in to the tank.
Install a tempering valve in water line feeding toilet. Tempering valve will mix hot and cold water together so warm water fills toilet tank which will stop condensation.
If you mean the toilet tank, it means you have a leak and water (and $$$ if you have a water meter) are being lost. It is the same as a leaky faucet. You need to find the source of the leak and repair.
Plumbing Fixtures, Cheap Plumber, Gas Water Heater Installation, Hot Water Heater Maintenance, Leak Detection Service, Fix Toilet Water Tank Leak, Toilet Replacement, Drain Cleaning Services, Septic Tank Maintenance, Garbage Disposal Troubleshooting.
The ONLY places any toilet can leak is between tank and bowl, or between bowl and floor.
you will have to cut the bolt between the tank and bowl (hacksaw blade works well, it will take about 5 min.to cut.) Always change all bolts and change tank to bowl gasket also.
An "unlevel" toilet flange might be a little difficult for a wax ring to seal, but could not in any way be responsible for a tank leak. If the tank is leaking between the tank and bowl, remove the tank, check the tank itself for a crack or defect, then check the flange gasket and tank bolts and gaskets. How do you know your flange is unlevel?
Plumbing Toilet, Toilet Repair, Clogged Toilet, Leaking Toilet, Toilet Installation, Toilet Leak, Clogged Toilet Repair, Toilet Repair Service, Plumbing Issues Toilet, Leaking Toilet Flapper, Fix Clogged Toilet, Toilet Leaking At Base, Blocked Toilet Repair & Leaking Toilet Tank
There are a number of measures that you can take to stop a leak in a gas tank inlet hose. You should ensure that both ends are fastened properly and sealed so as there would be no leaks.