"Brightness" is not used to describe the two possible settings of a DIP switch. The terms "on" and "off" are commonly used instead.
To set a dip switch, you can flip the switch either up or down. For example, setting a dip switch to "on" would mean flipping it to the up position, while setting it to "off" would be in the down position.
Please clarify or explain what you are trying to accomplish. There are no dip switch setting on that wiper motor that I have ever seen.
The dip of a unit represents the angle at which the bed inclines from the horizontal. In dip-slip faults, the fault blocks move up and down, parallel to the dip of the fault plane.
Dip setting: 50% sour cream and 50% chives
You can not use a 10 switch for an 8 switch. I just had to call a lock shop for the info.
Make sure that your machines have u38 chips in them
Dip switch adjustment
Leave it alone. Don't think about it.
The strike of a rock unit is the compass direction of a horizontal line on the rock surface, while the dip is the angle at which the rock unit is inclined from the horizontal plane. Together, strike and dip describe the orientation and slope of rock layers in relation to the Earth's surface.
If the 8510 is the ProWriter model then it may be the same as the Apple ImageWriter in which case the notes for the ImageWriter (See links below) may be of use.
To change your photo, go to settings.