If you get a new ip address each time you connect to the internet that means you are having a dynamic ip address, so you can easily reset it by just switching off you DSL modem or disconnecting the dialup internet and then reconnect the internet or restart you DSL modem. So you will get a new ip address. But if your ISP have provided you a static ip address then it is not possible for you to reset it.
I hope you get the answer of your question
The primary thing that happens when you reset your router is that it does back to default settings. This means that the network and wireless settings will need to be reconfigured.
One can reset the IP address with a Linksys router very easily. One must first reset the router, then go into the computer networking settings and reset within the settings.
If you cannot aquire an IP it is most likely that the router needs reset or you need to update your drivers.
You can find your public IP address by going to "Start," "Run," and typing in "cmd". When the Command Prompt loads you need to type in "ipconfig" and you should receive information on your IP and connection. You may as well go to the website listed at the bottom to find your Global IP Address.
That's probably an IP address of router. If it is router just turn it from electricity and then turn it back on.
You can can reset your IP address by : 1. Opening the Windows Command Prompt located in Start -> Accessories or Start -> Run -> Type in either "cmd" or "cmd.exe" (without the quotes) 2. Type in "ipconfig /release" (without the quotes) 3. After releasing the IP, typie in "ipconfig /renew" (without the quotes) If the instructions above doesn't work, you can set a manual IP address by : 1. Going to Network and Dial Up Connections in the Start -> Control Pannel 2. Going to your local area connection 3. Click "Properties" 4. Click "Internet Protocol (TCP/IP)" 5. Then again click "Properties" 6. Selecting the "Use the Following IP Address" 7. Entering an IP address available on your network
You probably need to reenter the IP Address into the router.
Even though modems usually get ip addresses from a DHCP server (dynamic ip address) providers usually bind the modem mac address with a dynamic address. It means that basically you have a fixed ip address. Reseting modems might not necessary mean the modem gets a new ip address. But it happens with certain services.
If your PC receive a automatic IP address from your router some times a IP reset is needed to reconnect. You might have a IP conflict, faulty settings or your router had a "hick-up".Windows/flag button + RType and hit enter: cmdType in followed by enter: ipconfig -releaseHit the up arrow once.Hit the Return key 5 times.Click the buttons: n e w enter.Bonus: While you are there also do a ipconfig /flushdns(a right click on the connection icon on your taskbar and clicking repair will perform the commands automatically)
You get 1. If you select the wrong birthday it will say you are too young. the way you can fix this is to reset your ip address
it depends on how you are linking the xbox to the internet but i would reset your internet box and your wifi while your xbox is wired to your houses network
You must reset a modem each time you take away or add a piece of equipment to it, because it needs to pick up an IP address with whatever you are hooking it up to. That IP address helps those pieces of equipment communicate with one another. If you were to add a router or another PC to a modem that had not been reset and still had the old settings from a different machine, it wouldn't allow you to connect. Those devices have to be in sync with one another.