0
If it is a Monticello Lav, you should be able to grab it with pliers and pull it out. Make sure you pull it smooth and straight.
If it is a shower faucet, do the same thing, just be sure you are careful and do not rip the shower valve out of the wall.
Just did one of those today, WITH a diverter stem!
Add your answer:
Earn +20 pts
What is a moen cartridge?
The inside part of a Moen faucet / shower body
What is the correct hex wrench size to remove a moen faucet handle for the monticello with cathedral model?
I believe that is 5/32.
Moen faucet still drips after changing cartridge?
Did you flush out the valve body prior to installing the new cartridge
How does the cartridge come out of a Moen Chateau single handle faucet?
The handle must be removed to allow access to the retainer clip, then the cartridge pulls out. You may need a cartridge puller if the faucet is old.
How do you remove the dome from a moen 7560 faucet?
we have had this faucet for a long time and I have done several repairs on it, because it has a lifetime warranty Moen sends us the parts and it is simple to repair. To remove the handle, carefully remove a small plug on the front of the handle, some have the Moen name on them and the one that we currently have is the same color as the faucet. You can remove them easily with a small knife or screwdriver, just make sure not to scratch the finish on the faucet. Under that plug you will find an screw that uses an Allen wrench (3/32), loosen it and the handle will come right off by lifting up on it. To get to the rest of the faucet just lift the dome and the cartridge is ready to remove with a wrench. Don't remove the cartridge without turning off your water source!
Can you use a Moen replacement cartridge 1225 in a Belvedere 622 faucet?
YES, you can use moen 1225 as a replacement cartridge. It works perfect. Sad so hard to find an honest plumber.
What is the hex wrench size for Moen faucet CA87007CSL?
The correct hex/allen wrench to remove a Moen faucet handle (for the Renzo model faucet) is 7/64".
What do you do if the faucet leaks after replacement?
it depends on Where it is leaking from and who the manufacturer is. Moen will replace your cartridge and or faucet for free as they have a lifetime warranty. if it dripping Under the sink you could have a bad valve which means that the entire faucet will need replaced. if it is dripping from the spout it is most likely the cartridge which can be repaired or replaced without having to remove the entire faucet. contact the manufacturer.
No cold water only hot in moen faucet?
if it is a single lever faucet the cartridge needs to be replaced. check the supply valve under the sink first,
How do you replace cartridge on Moen S711?
Yes, you can replace cartridge on any Moen unit
How do you get to the washer of a Moen kitchen two-handle faucet?
Shut the water supplies off, take the handle off, unscrew the cartridge. The washer will be on the bottom of the stem of the cartridge
Do a Danco cartridge puller work on a moen faucet?
No. Moen cartridges pull right out with a pair of channel locks after you pull the retaining ring out. Turn the water supplies off first
