How do you remove magnesium rod in hot water heater?

Answer 1

Follow Some steps for remove magnesium rod in hot water heater.

1 Turn off water and fuel supply (gas or electricity) to water heater.

2 Partially drain the water heater.

3 Locate the anode rod on the water heater; if necessary, unscrew and lift off the cover from the top of the heater.

4 Use a ratchet wrench and 1 1/16-inch deep socket to unscrew the anode rod from the heater.

5 If the anode rod won't budge, slip a steel pipe onto ratchet wrench handle for extra leverage.

6 Lift out and discard the old anode rod.

7 Wrap Teflon tape around threads of new anode rod; insert anode rod into water heater and tighten with 1 1/16-inch socket.

8 If limited space above the heater prevents the installation of a standard anode rod, install a collapsible type.

9 Turn on the water and fuel supply to the water heater.

alliedallcityinc.com