0
Make sure the H700 is fully charged up (not necessary but you'll probably begin to immediately use it and it would be bad to have it discon because the battery is dead). Turn off the H700 (the ring around the talk button should not be flashing blue every few seconds), push the talk button, that's the oval button on the face of the headset, for about five seconds, until the ring around it displays a purple color. Immediately let go of the button and flip open the tiny microphone extension. Now it's in pairing mode and you can leave it while you fiddle with the iPhone.
From the iPhone main menu, select the "Settings" button, then in the Settings menu, select the "General" option.
Touch the "Bluetooth" menu item on the General menu. when the next screen appears, if your Bluetooth is already turned on it will start looking for (discovering) your H700. If Bluetooth is not turned on, slide the gray button so it displays "on" instead of "off". Your iPhone should now start discovering your H700. It should automatically find your H700, then display another screen that prompts you for a code. According to the manufacturer's guidelines, the H700 requires you put in "0000" that is 4 (four) Zeros as the code.
If everything went well, the "Bluetooth" screen should be displayed again and the Motorola H700 should show up under the word "Devices" showing that it is Paired.
Your H700 should now also blink Blue around the talk button.
If things didn't go well. I suggest navigating back to the bluetooth menu. Turning bluetooth off on the iPhone. Flipping closed the microphone boom on the H700 and starting over again. I had to do it twice because I fumble fingered the 4 zeros. NOTE: it is not necessary to have the H700 right on top of the iPhone, but I'd have it within an arms reach, just to be sure you get a good signal and you actually pair to your Bluetooth headset... ~Tex
Once the iPhone has discovered the H700 if it continues to state "Not Paired" simply tap the Motorola H700 box and it will take you to the next screen. Enter "0000" as the security code. The iPhone should now successfully pair with the H700....gapeng1
with the bluetooth in off position (switch back), hold down the center button until the color changes to pink, quickly flip the bluettooth on and the light will remain on. It will ask if this is the correct bluetooth. You answer yes/no. It will then ask if you want to pair it, answer yes, then it will ask for the password. put the password in and it should be connected.
Switch your phone to search for a bluetooth device then turn on the Motorola h670. It will come up on the phone menu. Select 'pair with device'. It will ask you for a passcode, enter 0000. The phone should then pair and ask if you want it to automatically pair when you switch on the blue tooth device. Hope this helps!
Add your answer:
Earn +20 pts
Who makes Motorola RAZR Maxx cell phone?
Motorola, which at the time was part of Google, made the Motorola RAZR Maxx.
What are the main features of the Sprint Motorola V3 Razr?
Main features of the Sprint Motorola V3 Razr include Picture Caller ID, Extra color display, Bluetooth and a VGA camera. You can learn more about this phone online at the Wikipedia.
What is razr to iPhone?
THE I-PHONE IS IN AWORLD ALL IT'S OWN IT CAN NOT CONNECT TO ANYTHING BUT WEB AND ONE BLUETOOTH HEADSET
Which is a better phone Samsung Galaxy s2 or Motorola razr xt910?
razr.
Can you send full length songs to phone With Verizon Motorola RAZR?
yeah you can, but you have to either get a USB cable to connect from your phone to the computer, or you have to use a bluetooth enabled computer to send it through bluetooth to your phone. Razors typically don't have a lot of storage space for whole songs, so you might just be able to fit one whole song on there. good luck!
Do you have to have a Motorola bluetooth for a Motorola razor phone or can you use a Samsung bluetooth?
A Sansung Bluetooth headset can be used, but will likely give instructions for a Samsung phone. To use the headset, # Follow the instructions for the headset to set it into pairing mode. # Then, on the RAZR go to Menu, Settings, Connections, Bluetooth, Handsfree, Look for Devices. The phone will then list all Bluetooth devices that it finds. # From the list select your headset. # Then enter the passkey given with the phone. After all this, test the headset by making a call.
How do you take your Motorola RAZR phone out of emergency mode?
#911
Does the cell phone cover for the Motorola RAZR come in any other colors than black?
Yes, the cell phone cover for the Motorola RAZR comes in an array of patterns and colors.
Is droid razr good?
Yes, it is a great phone, but it now has a successordevice: the Motorola Droid Razr HD.
Syncing Bluetooth Devices with a Motorola Razr V3?
The Motorola Razr V3 is a Bluetooth capable device. Which means it can be paired with any other devices that use bluetooth such as headsets or vehicles. To pair the Razr V3 with a bluetooth device, press the Menu key, select Settings then Connection and bluetooth. Make sure that the device that is being paired up is powered on before it is linked. Some bluetooth devices may need a pin to be synced so be sure to check the manual of the device to get the correct pin to enable syncing.
What type of cell phone does axl rose use?
Motorola Razr.
Where can a Motorola Razr V3M be bought?
One can purchase a Motorola Razr V3M in online stores such as eBay, Amazon or GSM Arena. It is also available on Discount 24, Phone Arena and Phone Scoop.
