0
Add your answer:
Earn +20 pts
Which network devices can be found in LAN but not with WAN?
An LAN card is a must if you wish to connect to a LAN but it is not required for WAN
The card provides a port for a network cable to connect the PC to a network?
Lan Card provides a port for a network cable to connect the pc to a network.. LAN : Local area network or Ethernet Card and Network Card
What part is used to connect to the internet on computer?
Computers connect to the Internet via a network interface card (NIC) or wireless LAN adapter (WiFi adapter). Historically, computers could also connect to the Internet via a built-in modem for use with telephone lines.
What is a list of the components including cables required to connect PCs?
cross cable, two LAN card one for each, ip address of same class, rj 45 connector,
What is lan card how we can find lan card in computer?
There is no such thing as a LAN card. LAN stands for Local Area Network. The card which communicates with a LAN is called an "Ethernet" card. This Ethernet card/controller may be a separate card but in modern computers is more likely to be a single chip built onto the motherboard. The presence of the chip/card will be indicated by an RJ45 connector/socket on the back of the computer.
Which two methods can be used to connect IP phones to a network?
1) connect the ip phone to the ethernet LAN using an rj45 connector 2) establish an internet connection then use an analog telephone adapter.
Can you connect a NIC to CNIC?
Type your answer here... yes, we can connect a nic to a nic. A nic is a Network Interface Card which has a unique MAC. When we connect two devices(say laptops) using a lan cable,we actually connect their nics.
Define how to be configure 100 PC at internate?
Answer: purchase high speed internet connection brodband. use two lan card on this PC. and one lan card connect directly internet connection wire. and another lan card wire connect in swith and share internet connection and then use.
Can rj-11 connect laptop to a local area network?
A true local area network requires connectivity via cat5 or an RJ-45 connector. RJ-11 is simply a telephone wire that does not have enough pins to connect to a LAN. If all computers on a LAN are using RJ-11 connections, you can setup a dial-up network. Unfortunately, the speed will drastically decrease. It is possible, however, to buy a cat5 (RJ-45) connector that converts it to USB. Or you can buy a wireless router and card for your laptop.
How do you connect a PSP to the internet without using a LAN security setting?
Connect using Wi-fi instead.
How do you connect a PC to a lan using telephone cables?
You can't using telephone cables. Telephone cables use 4 wires, but none of the wires are twisted, so there will be problems with crosstalk. Also, telephone cables use an incorrect connector (RJ-11) for a NIC card in a PC, which needs RJ-45 connectors.
Does a usb wireless adapter requires lan card installed in your desktop to be able to connect to a wireless network?
No. The USB connection will be used to pass the data, not a LAN card.
