How can I install a wireless bridge?

Answer 1

A wireless bridge is a device that creates a network. Devices that connect to the bridge can communicate with each other. For example, a wireless- equipped desktop computer could communicate with and print to a wireless network printer if they were connected to the same wireless bridge. Bridges can also connect to devices such as routers that provide high-speed internet access from an Internet Service Provider, or ISP. You can set up a wireless bridge to connect to a router so that the wireless computers connected to the bridge can share the high-speed Internet access and communicate with each other.

Instructions Things You'll Need:

• Power adapter that shipped with bridge

• Ethernet cable

• Device product CD

Step 1

Power up the bridge. Plug one end of the AC power adapter with which the device shipped into the power jack on the bridge and the other into an electrical wall outlet. If the device can function as both a bridge and an access point, set the device to "bridge" mode following the manufacturer's instructions. Press the device's power button if necessary; instructions for finding it will be provided in the device's user guide. For example, the D-Link DAP-1522 Xtreme N Duo Wireless Bridge does not have a power button and starts when it is plugged into the electrical wall outlet.

Step 2

Connect via Ethernet. Plug one end of an Ethernet cable into an Ethernet port on the bridge. Ethernet ports are generally placed on the back of the bridge. Plug the other end of the Ethernet cable into the computer that had previously been connected directly to your Internet access device.

Step 3

Configure the bridge. Open a web browser and navigate to the address for the bridge's configuration management interface. The address will vary depending on the manufacturer. For example, to configure a D-Link DAP- 1522, type http://DLINKAP in the browser's address bar.

Step 4

Enter a user name and password to access the bridge's management interface when prompted. Both will be provided in the device's user guide. The default user name for the DAP-1522 is admin and, also by default, there is no password; leave the password text box blank.

Step 5

Start the connection wizard. The main page of the bridge's management interface will generally have an automated connection process. For a D- Link DAP-1522, click the "Launch Wireless Setup Wizard" button. Follow the prompts. Insert the product CD if prompted. Close the wizard when it finishes.

Step 6

Move the device to its permanent location. Unplug the Ethernet cable from your computer and unplug the bridge's power adapter from the electrical wall outlet. Place the bridge close to your high-speed Internet access device. Plug the power adapter from the bridge into an electrical wall outlet. Plug the Ethernet cable from the bridge into the designated Ethernet port on your Internet access device as directed in device's user guide. This completes the process.

Answer 2

In order to create a network, you need a wireless bridge. You are also able to use a bridge in order to connect two or more computers together to share high-speed internet access and communicate with one another. These helpful hints will provide you with information on how to set up your wireless bridge.

• First, you will need to plug in your bridge to provide power to it. If there is an option to set your bridge to either ‘bridge’ or ‘access point,’ set it to ‘bridge.’ There are different ways to power up different bridges, so follow your manual to determine the correct way to turn your bridge on. For example, some bridges automatically turn on when plugged in, while others have a power button which turns the power on.

• Second, you will want to plug an Ethernet cable into the Ethernet port on your bridge. The ports on your device may be different from others, so once again check your manual as to the location of your Ethernet port. Plug the other end of the cable into the computer which was connected to your internet access drive.

• Next, you will want to open a web browser and go to your bridge’s configuration web page. Your manual will advise you which web page to go to, in order to correctly configure your bridge.

• Once logged in, start the connection wizard. Most bridge configuration pages will have an automated connection process, so you typically do not have to locate the connection wizard. Once the wizard process is completed close it.

• After you have configured your bridge, unplug the Ethernet cable from the computer, unplug the bridge’s power cord and place your bridge in its permanent location. You want to make sure the bridge is located close to the high-speed internet access device, however. Once placed, plug the power cord in, and plug the Ethernet cable into the designated port on your access device.

Creating a bridge for wireless access is a simple process. The bridge will enable you to allow two or more computers the ability to share the same internet access point and communicate with one another.

Answer 3

If you are looking for an easy way to install a wireless bridge, video is the way to go. YouTube and Bestbuy have videos to help you learn to install a wireless bridge.

Answer 4

This is a video on youtube www.youtube.com/watch?v=41JWTI7ZfEg that explains how to do it. If you want help you can check centurylink.com.