Using NAT a computer fails to locate a DHCP server . NAT is method that provide mapping between private and universal addresses. Network address translation also supports VPN .
Using NAT a computer fails to locate a DHCP server . NAT is method that provide mapping between private and universal addresses. Network address translation also supports VPN .
Yes. There are a number of ways this can (and in fact does) happen. The most obvious happens in a DHCP request, which is a method by which a computer that does not have an IP address gets an IP address from a DHCP server.
DHCP server must be assigned a static IP address...On a Windows computer you can find out the IP address of the DHCP server that assigned your current IP address by opening a command prompt and typing "ipconfig /all".
DHCP s just a server that provides IP details to a computer. Since it can be set up to give statc IP address details to specific computers it has no disadvantage....unless of course the DHCP server crashes.
DHCP
Nothing. That is not a valid IP address as its stands however ip addresses with the first 2 octets of 169.254.xxx.xxx means that Automatic Private IP Addressing has been enabled because no DHCP server was found and no static address has been defined.
The same as a public IP. Your choices are: (1) assign an address manually, and (2) configure the computer to get an IP address automatically from a DHCP server.The same as a public IP. Your choices are: (1) assign an address manually, and (2) configure the computer to get an IP address automatically from a DHCP server.The same as a public IP. Your choices are: (1) assign an address manually, and (2) configure the computer to get an IP address automatically from a DHCP server.The same as a public IP. Your choices are: (1) assign an address manually, and (2) configure the computer to get an IP address automatically from a DHCP server.
A dynamic address, assigned by the DHCP server. Static addresses can also be assigned by the DHCP server through reservations using the unique MAC addresses to identify each machine. This ensures a machine receives the same address each time it requests an address from the server.
The IP address is obtained automatically using the DHCP protocol
You haven't indicated what operating system you are using. For windows, using the 'ipconfig /all' command will show you what the DHCP server address is.
The client