An interrupt is a signal from hardware (h/w interrupt) or software (s/w interrupt) to indicate the occurence of an event. It indicates the need of a change in execution. Interrupt handling or servicing of the interrupts depends upon the design of the operating system. A routine which will be called for servicing the interrupt is known as interrupt service routine or ISR and the request for the ISR through an interrupt is known as interrupt request or IRQ. Interrupt is a mechanism used for implementing the multitasking concept. It will use the concept of context switching, for servicing the request.
The pins used to control interrupts in the 8085 are INTR/INTA, RST5.5, RST6.5, RST7.5, and TRAP.
Parentheses or dashes are typically used to set off material that interrupts the flow of a sentence.
There are three types of interrupts.... 1. internal Interrupts 2. External Interrupts 3. Software Interrupts... read more
it has 256 interrupts ..
IRQ 14
DI, EI, RIM, and SIM.
comma
The 8085 does not have an adjustable priority interrupt schema. You can only turn interrupts off, and mask certain interrupts, such as RST5.5, RST6.5, and RST7.5. However, that said, you can implement a priority schema, of sorts, within these interrupts, including INTR, by using the SIM instruction. You can't change the basic priority but you can disable certain interrupts while others are being serviced, if you so choose.
Special restart instruction used with interrupts
An interrupt is an event that alters the sequence in which the processor execute instructions. It is generated by hardware of computer system. Classes of interrupt:- IBM processor has six types of interrupts. * svc interrupt(supervisor call) *input/output interrupts *external interrupts *Restart interrupts *Program check interrupt *Machine check interrupts
1.The excluding interrupts are INT0 & INT1 2.The Timer0 and Timer1 are interrupts are generated by TF0 and TF1
Maskable interrupts trigger events are not always important and so the programmer can decide that the event should not cause a program to jump. Nonmaskable interrupts can not be ignored by the programmer and therefore they have absolute priority.