0
Add your answer:
Earn +20 pts
In comparing ripv1 and ripv2 message formats what is the only ripv2 message format field?
Subnet mask
If you have 2 routers 1 ripv1 and 1 ripv2 will they talk to each other?
If you have two routers set up, one running RIPv1 and one running RIPv2, neither router will accept updates from the other. R1: (RIPv1) RIP: ignored v2 packet from 192.168.1.2 (illegal version) R2: (RIPv2) RIP: ignored v1 packet from 192.168.1.1 (illegal version)
What condition would RIPv2 allow that RIPv1 would not allow?
A 192.168.0.0/16 network
What information is included in RIPv2 routing updates that is not included in RIPv1 updates?
subnet mask
Which feature of RIPv2 enables it to function as a classless routing protocol?
RIPv2 sends subnetmasks in the routing table updates. RIPv1 does not, which causes it be class-full.
What are the main differences between RIPv1 and RIPv2?
Classful vs. Classless RIPv1 is a classful protocol, meaning that the subnet mask is not included in the routing updates. With RIP, only the default subnet mask is used to identify networks. RIP v2 is a classless protocol, meaning that the subnet mask IS included in the routing tables.. RIPv2 supports variable subnet masks (VLSM).
Difference between ripv1 and ripv2?
The main difference between RIPv1 and RIPv2 is classless routing. RIPv2 incorporates the addition of the network mask in the update to allow classless routing advertisements. This is extremely important for the flexibility needed to efficiently utilize network assignments for an ever-shrinking pool of IP addresses.There are other differences, as well. In RIPv2, the destination address for the updates is multicast, instead of broadcast, as in RIPv1. This reduces the burden on the network devices that do not need to listen to RIP updates. With broadcast, every device on the broadcast domain must at least open the IP packet and process the initial information to determine relevance. With multicast addressing, if a device needs that information, it will listen to that specific address. If it does not need the RIP information, it does not have to process the multicast address. The multicast address RIPv2 sends to is 224.0.0.9.Another addition to RIPv2 is authentication. Authentication is used to ensure that routes being distributed throughout the network are coming from authorized sources.
Which routing protocol excludes the subnet information from routing updates?
RIP VERSIONV1 can be seen to exclude subnet information from routing updates, this is because ripv1 is a classful routing protocol and does not support VSLM, this was corrected in RIPv2 where ripv2 does send out subnet mask's in the form of a prefix eg /24 which is the subnet mask of 255.255.255.0 or a class c address.
Which routing protocol uses hop count as the metric?
RIP (Routing Information Protocol) uses hop count as the metric. It measures the distance to a destination network based on the number of routers (hops) that a packet has to traverse to reach the destination.
Can two applets access each other?
Because RIPv1 is a classless protocol, it does not support this access. RIPv1 does not support discontiguous networks. RIPv1 does not support load balancing. RIPv1 does not support automatic summarization.
Can you mix RIPv1 and static routing?
RIP V1 dose not support CIDR or VLSM as it a clasfull routing protocol that dose not include the subnet mask.. however if you were to use RIPV2 you could use static routing with it as it is a classless protocol and dose incoperate the subset mask in the update
Which routing protocols are classless?
RIPv2 and EIGRP
