The INT 21H instruction in the 8086 is a software interrupt to vector 21H. In order for it to be used for input/output, the programming that responds to INT 21H must be present. This is part of the Operating System.
The 8086 microprocessor has 40 pins.
It is mightily referring to Microprocessor 8086 . I think you saw "8086 microprocessor". The 8086 is nothing it indicates the number of microprocessor same as Digital or analog ic's . 8086 microprocessor has 20 Address buses and 8 data buses which has 1 Mb inbuilt memory for performing several type of airthmatical and logical operation.
queue of 8086 microprocessor is 6 bits
The 8086 Microprocessor operate to require frequency that is provided by clock generator to 8086 Microprocessor and also Synchronization various component of 8086.
it is a 16 bit microprocessor & it has 40 pin .
Pins 1 and 20 in the 8086 microprocessor are (both) power and signal ground (GND).
8086 main application is to evaluate the arithmetic operations in any systems that uses 8086
Two ground pins are used in the 8086 microprocessor to increase the bus pull-down current capacity.
Which microprocessor accepts the program written for 8086 without any changes?
Its 16bit microprocessor,and-> the 8086 has a 16bit databus 20bit address bus-> the intel 8086,is designed to operate in two modes namely(1) minimum mode(2) maximum mode
ya possible