you put the primer forward to create elastic potential the put the trigger to turn that to kenetic and sound energy
Release of a spring from compression Recoil of gun after firing a shot
Spring
You could buy a weaker spring.
yes you just need to put a worse spring in it
i think it has about 2MB
No, it is a cheap spring gun and could not be used in an airsoft match
No company makes a spring action galil airsoft gun currently.
The Spring Gun - 1907 was released on: USA: 14 October 1907
alright, first you need to separate the gun into two pieces. Start by holding down the orange button on the right side of the gun. While you hold down the button, on the left side of the gun, turn the metal lever in front of the safety 90 degrees clockwise. The orange button and the lever can now come out. Hold the gun like you would cock it except pull them apart. Now the barrel and the trigger should be apart. The way daisy put this gun together makes it hard to remove the spring and the spring stopper. You will need two screwdrivers, first you need to separate the spring and the spring stopper. While one screwdriver pulls the spring towards the barrel, put the other in the back of the spring stopper and pull the spring stopper out from the bottom of the tube that holds it. ( The plastic is weak and should bend without breaking. After the stopper is out, all you need to do is pull a small bit of the spring out then spiral the rest of it out.
The energy drink M150 is manufactured by a Thai company called Osotspa Company Limited. The M109 is the main brand in Thailand and currently holds about 70% of the energy drink market.
all fire works with green wicks are water proof