What is the Front and rear ride height for 1973 roadrunner big block b body measured from where?
you need to get it aligned to set the height as it takes a special tool to get it set right and there is no specs on the back of the car, as long as you have good rear springs the car is set in the back.
Check the fender tag or broadcast sheet for the option package - there was no separate model after 1975, only an option trim package on the Volare model.
What is the firing order for a 1971 roadrunner with a 383 motor?
1-8-4-3-6-5-7-2 and distriburator rotation is counter clockwise.
What is the emblem placement on a 1970 road runner?
People have different definitions of " emblem". If you are referring to the raised chrome / silver lettering, they are placed 4 inches behind the seam where the side quarter panels sport the fake side scoops directly in the center. THEY DO NOT GO IN THE SCOOPS ! If you are referring to the roadrunner cartoon characters, they go as follows:
running roadrunners go on the front fenders in direct line with the side scoops on the center line approx. 6 inches back.
the standing roadrunner with helmet goes 2 places
1. on the inside of the passenger door on the upper painted area
2.on the right side of the trunk lid 3/8" past the trunk/ quarter panel seam... NOT ON THE TRUNK LID ITSELF.
How do you know if you have a real Plymouth roadrunner or clone?
Well at first you check if VIN number is on your Fender-tag
Fender-tag is on the inner fender, and the VIN number should be the same as the last 3 groups on the fender-tag.
If they are not matching there is something fishy about it.
If they match you could decode the VIN number and the fender-tag.
Just put this in Google "decoding fender tags mopar"
pick one of the sites that show up, be careful to do it the way the instructions say.
If you have trouble doing it you can mail me a good picture of both and ill do it for you, and the i mail you the result.
Hope it helps...Mopar
How many 1974 gtx roadrunners were produced?
none, either it was a GTX or a roadrunner.
Not so, 79 is the accepted number of "Road Runner GTX"s produced in the model year 1974. Any 72-74' Road Runner ordered with the 440HP engine was officially named a "Road Runner GTX" having both name plates.
When a 1972-1974 Roadrunner was upgraded to the 440ci engine, it became a Roadrunner/GTX. The Dodge/Plymouth Red Book pocket guides lists 79 RR/GTXs produced in 1974. This is thought to be too low. The White Books produced by Mopar expert Galen Govier lists the production of 1974 RR/GTXs as 386. This is the current accepted production number.
Self-described "Mopar expert" Galen Govier.
Yes, I know. But he has amassed a great deal of documentation and data. I wish I had the foresight to do that.
What is the code for a 1970 road runner with a 440-6 pack?
The 5th digit of the VIN is "V", indicates a 440 6-BARREL for a Plymouth (Dodge is 6-PACK).
If you need any info on your Mopars you can find it here
http://www.mymopar.com/index.php?pid=27
Remember there are 2 pages for your car A and B
What i did for my Satellite, i printet it out in a4 format and coloured all the wires and the meltet it in plastic, that way it does not get messy and if it does just wash it.......
What is the right engine for your 1969 roadrunner vin RM23H9A293344?
you need to get a decode book for a 69 roadrunner to see what your vin # calls for.
body type (R)=Road Runner
Price class (m)= Medium
Body type: (23)= 2 dr hard top
Engine: (H) = 383 1-4 bbl
Year: (9) = 1969
Manufactured (A)= Lynch road, Michigan
Sequence # (23344) 193344th. built
* hope this helps, you can find out much more from your fender tag though* IE: paint code etc
How does a fifteen year old get his first job with no resuma?
u can tri going 2 a family member that owns a fastfood or restorant and ask them 4 a job and they mabe able 2 help u
69 roadrunner cylinder id 383?
Cylinder locations: Driver's side front to rear 1-3-5-7 Passenger side front to rear 2-4-6-8 Distributor rotates clockwise. Firing order: 1-8-4-3-6-5-7-2