check stabilizer rods behind front tires,check to see if they need tightening or replacing.
can I adjust the stabilizer on my 1996 Honda accord
if it happens when braking, check the stabilizer bolts. both mine were broken
Possibly could use a wheel alignment, or tire pressure on all tires the same,or it also could be your stabilizer rods need replacing and while your looking at them check your struts and springs.good luck with that.
Shock first, then check your stabilizer. Add stabilizer as needed.
1 Remove wheel, tie rod ends, nuts from link bolts. 2 Remove stabilizer bar bushings 3. unbolt rear engine mount bracket from sub-frame 4 remove sub-frame (6) bolts 5 Drop sub-frame 3 inches onto jack stands. 6 remove stabilizer bar and bushings through wheel well. 7. have 1 beer only install new stabilizer in reverse order IMPORTANT to observe factory torque specifications
The Stabilizer was created in 1984.
It's intended to prevent excessive leaning when you go around corners. When one front wheel starts to get the extra weight of going around the corner, the sway bar/stabilizer transfers some of the weight to the opposite side spring.
The duration of The Stabilizer is 1.5 hours.
A stabilizer is typically used for controlling the balance of what the stabilizer is connected too. For instance, a car stabilizer makes sure the car stays in a safe balance.
check yr stabilizer bush
How do you install a rear sway bar on a 2003 f 150 4 wheel drive