Things that might cause a pulley to wobble: The pulley is bent. The shaft the pulley is on is bent. The pulley is mounted crooked.
It might just be age. They tend to crack when the rubber gets brittle. Otherwise, it could be a bad bearing in one of the units, quite likely the tensioner pulley. With the belt off, check to make sure they all turn freely. The tensioner pulley could have a weak spring which would cause the belt to slip over the other pulleys. Dirt on a pulley or a frayed edge could cause this also.
because you touch it.
To remove a crank shaft pulley you need to first jack up the car. Next, remove the bold holding the crack shaft pulley in place and remove the unit. Reverse direction to put the new crank shaft pulley on your car.
It is lock-tightÊso you need an impact to crack it loose. Remove the rear wheel by standing on the break while using a breaker bar, a rag stuffed at the point where the belt and pulley will help jamb it up enough to crack it loose.
No. Mini cracks are not known to cause death. A complete crack is what is needed to cause death.
outer rim the inner rim goes to the belt that connects to the ac pulley
if the male is a crack addict can the sperm cause the baby to be a crack baby
No. The idler pulley only maintains tension on the serpentine belt. A faulty idler pulley can cause noise and a loose tensioner arm can cause belt slipping but other than having a similar name, it has nothing in common with engine idling.
earthquakes and vocanoes
Yes
there are no gaskets on a tension pulley ther is however a spring and yes it can cause the belt not to run smoothly