0
You can try contacting Low Fee Counseling Services at Seattle University or the Seattle Counseling Service which offers sliding scale fees for grief counseling. Additionally, you can check with community health centers like Neighborcare Health or mental health organizations for more resources.
Add your answer:
Earn +20 pts
How is the Stanford-Binet intelligence scale linked to the Binet-Simon scale?
The Stanford-Binet intelligence scale is an updated version of the original Binet-Simon scale, developed by Lewis Terman at Stanford University. Terman revised and expanded the original scale to include a wider range of age groups and standardized it for the American population. The Stanford-Binet scale is still used today to assess cognitive abilities in individuals.
What are the disadvantages of semantic differential scale?
Some disadvantages of semantic differential scales include potential for subjectivity in how respondents interpret the scale's endpoints, limited scale points may restrict nuanced responses, and the scale may not capture the full range of attitudes or perceptions on a topic.
Scales of the gray oral reading test?
The Gray Oral Reading Test (GORT) consists of two scales: the Rate Scale, which measures reading speed, and the Comprehension Scale, which evaluates reading accuracy and understanding. The Rate Scale provides a Fluency Score, while the Comprehension Scale includes scores for Accuracy, Comprehension, and Overall Reading Ability.
What is the exact value of Fluorine's Electronegativity on Pauling's Scale?
The exact value of Fluorine's electronegativity on Pauling's scale is 3.98. It is the highest value of electronegativity on the scale, indicating Fluorine's strong ability to attract electrons towards itself in a chemical bond.
What is the difference between a test and a scale?
A test is a specific tool used to measure an individual's performance or abilities in a particular area, such as a psychological test to assess intelligence. A scale, on the other hand, refers to a range or continuum used to measure a specific attribute, such as a Likert scale to measure levels of agreement or satisfaction. While a test involves a series of questions or tasks to evaluate an individual, a scale is typically a single construct or dimension being measured.
Is there a fee to use a credit counseling agency?
Most credit counseling agencies do charge fees. Some offer sliding scale fees depending upon your income, others charge hourly fees which can be excessive.
Is a blood glucose sliding scale a ratio-scale measurement?
no
What is a rolling off-set?
a sliding scale
What has the author William McKay Littell written?
William McKay Littell has written: 'A scale for measuring a client's attitude toward counseling' -- subject(s): Counseling, Educational counseling
Where are some residential treatment centers that are open to the public and charged on a sliding scale?
MONDANARO-BASKIN CENTER at 516 Chestnut St. Santa Cruz, CA 95060 offers a sliding scale. Call them at (831) 423-9015
What can an abuser do to change her ways if she doesn't have enough money for various counseling programs?
There are free services offered at many churchs and I have heard being on whats called a sliding scale. In other words, on ones ability to pay. The main concern is the abuser get help and get it fast. Like NOW!!
How do you use vernier?
Instructions on useThe Vernier caliper is an extremely precise measuring instrument; the reading error is 1/20 mm = 0.05 mm.Close the jaws lightly on the object to be measured.If you are measuring something with a round cross section, make sure that the axis of the object is perpendicular to the caliper. This is necessary to ensure that you are measuring the full diameter and not merely a chord.Ignore the top scale, which is calibrated in inches.Use the bottom scale, which is in metric units.Notice that there is a fixed scale and a sliding scale.The boldface numbers on the fixed scale are centimeters.The tick marks on the fixed scale between the boldface numbers are millimeters.There are ten tick marks on the sliding scale. The left-most tick mark on the sliding scale will let you read from the fixed scale the number of whole millimeters that the jaws are opened.In the example above, the leftmost tick mark on the sliding scale is between 21 mm and 22 mm, so the number of whole millimeters is 21.Next we find the tenths of millimeters. Notice that the ten tick marks on the sliding scale are the same width as nine ticks marks on the fixed scale. This means that at most one of the tick marks on the sliding scale will align with a tick mark on the fixed scale; the others will miss.The number of the aligned tick mark on the sliding scale tells you the number of tenths of millimeters. In the example above, the 3rd tick mark on the sliding scale is in coincidence with the one above it, so the caliper reading is (21.30 ± 0.05) mm.If two adjacent tick marks on the sliding scale look equally aligned with their counterparts on the fixed scale, then the reading is half way between the two marks. In the example above, if the 3rd and 4th tick marks on the sliding scale looked to be equally aligned, then the reading would be (21.35 ± 0.05) mm.On those rare occasions when the reading just happens to be a "nice" number like 2 cm, don't forget to include the zero decimal places showing the precision of the measurement and the reading error. So not 2 cm, but rather (2.000 ± 0.005) cm or (20.00 ± 0.05) mm.thank you from assven q
How do you use the vernier calipers?
Instructions on useThe Vernier caliper is an extremely precise measuring instrument; the reading error is 1/20 mm = 0.05 mm.Close the jaws lightly on the object to be measured.If you are measuring something with a round cross section, make sure that the axis of the object is perpendicular to the caliper. This is necessary to ensure that you are measuring the full diameter and not merely a chord.Ignore the top scale, which is calibrated in inches.Use the bottom scale, which is in metric units.Notice that there is a fixed scale and a sliding scale.The boldface numbers on the fixed scale are centimeters.The tick marks on the fixed scale between the boldface numbers are millimeters.There are ten tick marks on the sliding scale. The left-most tick mark on the sliding scale will let you read from the fixed scale the number of whole millimeters that the jaws are opened.In the example above, the leftmost tick mark on the sliding scale is between 21 mm and 22 mm, so the number of whole millimeters is 21.Next we find the tenths of millimeters. Notice that the ten tick marks on the sliding scale are the same width as nine ticks marks on the fixed scale. This means that at most one of the tick marks on the sliding scale will align with a tick mark on the fixed scale; the others will miss.The number of the aligned tick mark on the sliding scale tells you the number of tenths of millimeters. In the example above, the 3rd tick mark on the sliding scale is in coincidence with the one above it, so the caliper reading is (21.30 ± 0.05) mm.If two adjacent tick marks on the sliding scale look equally aligned with their counterparts on the fixed scale, then the reading is half way between the two marks. In the example above, if the 3rd and 4th tick marks on the sliding scale looked to be equally aligned, then the reading would be (21.35 ± 0.05) mm.On those rare occasions when the reading just happens to be a "nice" number like 2 cm, don't forget to include the zero decimal places showing the precision of the measurement and the reading error. So not 2 cm, but rather (2.000 ± 0.005) cm or (20.00 ± 0.05) mm.thank you from assven q
How do you use vernier caliper?
Instructions on useThe Vernier caliper is an extremely precise measuring instrument; the reading error is 1/20 mm = 0.05 mm.Close the jaws lightly on the object to be measured.If you are measuring something with a round cross section, make sure that the axis of the object is perpendicular to the caliper. This is necessary to ensure that you are measuring the full diameter and not merely a chord.Ignore the top scale, which is calibrated in inches.Use the bottom scale, which is in metric units.Notice that there is a fixed scale and a sliding scale.The boldface numbers on the fixed scale are centimeters.The tick marks on the fixed scale between the boldface numbers are millimeters.There are ten tick marks on the sliding scale. The left-most tick mark on the sliding scale will let you read from the fixed scale the number of whole millimeters that the jaws are opened.In the example above, the leftmost tick mark on the sliding scale is between 21 mm and 22 mm, so the number of whole millimeters is 21.Next we find the tenths of millimeters. Notice that the ten tick marks on the sliding scale are the same width as nine ticks marks on the fixed scale. This means that at most one of the tick marks on the sliding scale will align with a tick mark on the fixed scale; the others will miss.The number of the aligned tick mark on the sliding scale tells you the number of tenths of millimeters. In the example above, the 3rd tick mark on the sliding scale is in coincidence with the one above it, so the caliper reading is (21.30 ± 0.05) mm.If two adjacent tick marks on the sliding scale look equally aligned with their counterparts on the fixed scale, then the reading is half way between the two marks. In the example above, if the 3rd and 4th tick marks on the sliding scale looked to be equally aligned, then the reading would be (21.35 ± 0.05) mm.On those rare occasions when the reading just happens to be a "nice" number like 2 cm, don't forget to include the zero decimal places showing the precision of the measurement and the reading error. So not 2 cm, but rather (2.000 ± 0.005) cm or (20.00 ± 0.05) mm.thank you from assven q
Sliding scale commissions?
"Sliding scale commissions" alter the amount of a sales commission based on the value of a sale. The usual arrangement is that larger sales receive a fixed percentage up to a certain price, and a lower percentage on the value above that price.
What file format reduces the number of colors based on a user-adjusted sliding scale?
Jpeg
Can you get low least count ther vernierhow and why?
To use the vernier scale, you find the reading on the fixed scale immediately to the left of the pointer, then you look along the sliding scale until you come to the place where the divisions on the fixed and sliding scales match up, and this gives you the subdivision of the main fixed scale divisions. Thus if the fixed scale is divided into mm, you will be able to read 1/10 mm from the vernier. I suggest you look up Wikipedia 'Vernier Scale' which has illustrations of this
