0
Depending on where you look, or the grade of steel that you are talking about can change this value. A density of 7.88 is often quoted for mild steel. If you add alloying elements such as tungsten, chrome or manganese to improve the steel, the density will change. So, the density of steel can vary between 7.75 and 8.05."
Brass is an alloy made of copper and zinc, which can vary in composition. The density of brass depends on the proportions of copper and zinc in the alloy. Different compositions will result in different densities, leading to the wide range observed in brass.
Add your answer:
Earn +20 pts
What is the density of brass?
The density of brass is approximately 8.4 to 8.7 grams per cubic centimeter.
How the density of the brass block compare to the density of the brass cylinder?
The density of the brass block and brass cylinder should be very similar since they are both made of the same material, brass. Density is a physical property that is unique to each material and is determined by the mass of the material divided by its volume. Therefore, as long as the block and cylinder are made of the same brass material, their densities should be close.
What is the Formula to calculating the weight of BRASS?
The formula to calculate the weight of brass is weight = volume x density. The density of brass varies depending on the composition, but a common value is around 8.4 g/cm^3. You would need to know the volume of the brass object in order to calculate its weight.
What is mass of brass?
The mass of brass can vary depending on the specific alloy and object in question. However, the density of brass is typically around 8.4 grams per cubic centimeter.
How the density of a large piece of aluminum compare to a small piece?
The same.
Why is there a range of densities for brass and steel in the density table?
The range in density for brass and steel in the density table reflects the fact that these materials can be alloyed with different proportions of other elements. The specific composition of the alloy will affect its density, resulting in a range of values. Additionally, variations in manufacturing processes can also contribute to the differences in density.
What is the mass of a brass axle that has a volume of 318mm3?
Brass is an alloy which has a density which ranges between 0.0084 and 0.0087 grams per mm^3 So the mass will range between 318 times the density range.
What is the density of brass?
The density of brass is approximately 8.4 to 8.7 grams per cubic centimeter.
Does copper and brass have the same density?
No, copper and brass do not have the same density. Copper has a density of around 8.96 g/cm³, while brass, which is an alloy of copper and zinc, has a density that varies depending on the specific composition. Generally, brass has a lower density than copper due to the addition of zinc.
What is the relative density of brass?
The relative density of brass is approximately 8.4 g/cm³.
How the density of the brass block compare to the density of the brass cylinder?
The density of the brass block and brass cylinder should be very similar since they are both made of the same material, brass. Density is a physical property that is unique to each material and is determined by the mass of the material divided by its volume. Therefore, as long as the block and cylinder are made of the same brass material, their densities should be close.
What is the density of a brass nut mass 34 g volume 4centimeter cube?
The density of the brass nut can be calculated using the formula: Density = Mass/Volume. Density = 34g / 4 cm³ = 8.5 g/cm³. Therefore, the density of the brass nut is 8.5 g/cm³.
How much does brass weigh per gallon?
First, two things. 1) Since brass is a solid at standard temperature and pressure, it is unusual to specify its density in fluid volume units, such as gallons. 2) Brass is an alloy comprising differing amounts of different metals, so its density must be specified as a range. Brass is about 8.5 times denser than water. It has a density of 8.4 to 8.75 grams per cubic centimeter. That translates to 70 to 73 pounds per US gallon.
What metal has a density of 8.5?
Brass
What is a bass horn?
A bass horn is a large brass instrument in the bass range - usually the modern tuba or archaic serpent.
What is the Formula to calculating the weight of BRASS?
The formula to calculate the weight of brass is weight = volume x density. The density of brass varies depending on the composition, but a common value is around 8.4 g/cm^3. You would need to know the volume of the brass object in order to calculate its weight.
Which is heavier brass or copper?
density of copper = 8930 kg/m^3 & density of brass = 8700 kg/m^3 copper is heavier
