0
What would prevent a pilot from lighting at all on a gas water heater?
Wiki User
∙ 14y ago
Disabling the ignition or disconnecting the gas source is a good start.
Wiki User
∙ 14y ago
If a pilot light on a gas water heater fails to ignite, it could be due to a defective thermocouple, clogged pilot tube, insufficient gas flow, or a malfunctioning gas control valve. It is important to have a professional technician diagnose and fix the issue to ensure safe and reliable operation of the water heater.
Add your answer:
Earn +20 pts
Why does water heater pilot light go out when gas is turned on?
If the pilot light goes out when the gas is turned on, it could be due to a dirty or faulty thermocouple, a clogged pilot tube, or a problem with the gas supply. It's important to have a professional inspect and repair the water heater to ensure it is functioning safely and effectively.
Hot water in bath not working?
Check if the hot water valve is fully open. If it is partially closed, this may be restricting the flow of hot water. Additionally, it could be an issue with the water heater or a problem with the temperature setting on the water heater itself. It may also be worth checking for any leaks or blockages in the pipes that could be affecting the hot water flow. If the issue persists, it may be best to contact a plumber for further assistance.
How long is the electric water heater can boil a glass of water?
An electric water heater typically takes around 5-10 minutes to boil a glass of water, depending on the volume of water and the power of the heater.
Can the hot water heater leak to the main line you have no sign of a leak except the sound in the wall?
Yes, it is possible for a hot water heater to leak into the main water line. If you hear a sound in the wall that could indicate a leak, it's important to investigate further and possibly seek professional help to prevent further damage. Water leaks can cause structural damage and mold growth if left untreated.
What causes a hot water heater to stop heating the water?
A hot water heater may stop heating water due to a variety of reasons including a broken heating element, a malfunctioning thermostat, sediment buildup in the tank, a faulty pilot light or gas valve (for gas water heaters), or a tripped circuit breaker or blown fuse (for electric water heaters). Regular maintenance and troubleshooting can help identify and resolve the issue.
Why water heater pilot won't stay on?
Thermocouple. Keep pilot knob depressed for 30 seconds after lighting pilot.
Why isn't the gas hot water pilot not lighting?
The pilot may not be lighting due to a problem with the gas supply, a faulty thermocouple, a clogged pilot tube, or a malfunctioning control valve. Check for gas supply, ensure the pilot area is clear of debris, and consider replacing the thermocouple if necessary.
If my hot water heater is not lighting what could the problem be?
If you have a gas water heater and your pilot light will not light, the most common problem is a faulty thermcouple. A licensed plummer can easily and cheaply fix this or you can find information to do it yourself online.
What could it be if you have very little hot water but water tank pilot light is working?
It's possible hard water deposits have built up inside. To prevent this and the early demise of your water heater, drain and flush the heater at least once a year.
When the pilot light cut off from the water heater for 2 days do you have to run water for it to reheat?
If the pilot light is on, the heater should come on by itself. If the pilot light is off then it has to be lit. If it will not stay on, the thermocouple is bad.
What is a orifice on water heater?
Gas water heater has an orifice for main burner and for pilot light, if not electronic ignition.
Hot water heater pilot light works heater wont light?
Have you turned the control from Pilot to On? Have you increased the temperature setting?
Water pool heater trouble shooting?
A number of problems can cause a swimming pool heater not to work. The most common I have found is lack of water flow. A heater needs a certain amount of water flowing through it to work correctly. The next most common problem is due to the pilot not lighting or remaining lit. This is usually due to the pilot generator not working. When you light a pilot light and have to hold it for a length of time before releasing the button you are allowing the pilot generator to heat up and then stay open to keep the pilot lit. Usually you need a licensed person to do work with changing items on a gas unit. The thermostat can be a problem for any water heater. Most of the heaters I have worked on were gas. If you have an electric heater waterflow still needs to be checked and the electrical connections can become corroded in the presence of chemically treated pool water.
Does the water heater still fill with water when the pilot light is off?
Yes
When will you have hot water after lighting the pilot?
it sometimes takes around 45 minutes to have hot water
When the pilot light is off does the water heater still fill up?
The water continues to run into and out of the water heater. There is just no flame to heat it up.
What causes the gas water heater pilot light to go out?
The most common reasons for a gas water heater pilot light to go out include a faulty thermocouple, a dirty pilot light orifice, a draft in the area, or a gas supply issue. It's important to have a professional inspect and repair the issue to ensure safe operation of the water heater.
