0
If the current is too large, the wire may overheat and eventually melt due to the increased resistance generating excessive heat. This could lead to a short circuit or even a fire hazard. It is important to use wires with appropriate current-carrying capacity to avoid such risks.
Add your answer:
Earn +20 pts
What would happen to the strength of the field if the current was increased?
If the current in a wire is increased, the strength of the magnetic field around the wire would also increase. This is because magnetic field strength is directly proportional to the amount of current flowing through the wire.
What would happen to a coil if the current passing is too large?
If the current passing through a coil is too large, it can overheat and potentially damage the insulation around the wire, leading to a short circuit. This can cause the coil to fail and may pose a safety hazard.
What would happen to the coil if the current passing through it was too large?
If the current passing through the coil is too large, it can cause the coil to overheat and possibly burn out. This can damage the insulation on the wire and affect the coil's performance. It may also lead to a magnetic field that is too strong, affecting the intended function of the coil.
If an iron bar is inserted into a wire coil what would happen to the iron bar?
The iron bar would become magnetized when inserted into a wire coil carrying an electric current. This is because the electric current induces a magnetic field in the coil, which in turn magnetizes the iron bar.
What would happen to coil if current too large?
If the current through a coil is too large, it can cause the coil to overheat, potentially damaging the insulation on the wire and leading to a short circuit. This can pose a safety hazard and may also permanently damage the coil, affecting its ability to function properly in the future. It is important to always operate coils within their specified current ratings to avoid these issues.
What will happen to an electric wire if a large current passes through it?
It will get hot.
What would happen if a wire in a parallel circuit broke?
All of the current would travel down the remaining intact wire - possibly overheating.
What would happen to the strength of the field if the current was increased?
If the current in a wire is increased, the strength of the magnetic field around the wire would also increase. This is because magnetic field strength is directly proportional to the amount of current flowing through the wire.
What happen in coil of wire when you pass a magnet through it?
A current would be induced in the coil.
What happen to the magnetic field of a wire when change the direction of the current in the wire?
Direction of the magnetic lines too would get changed
What would happen to a coil if the current passing is too large?
If the current passing through a coil is too large, it can overheat and potentially damage the insulation around the wire, leading to a short circuit. This can cause the coil to fail and may pose a safety hazard.
What would occur if you switch from 14 wire to a 12 wire?
12 wire is bigger than 14 so nothing would happen, the bigger the wire the more current it can handle and the better it is.
What is most likely to happen if you where to place a magnet in a coil of current carrying wire?
It would spin.
Which wire would have the least resitance a large diameter or small diameter wire and why?
large diameter wire simply because it will move easier Technically they would have the same resistance, but the larger diameter wire would allow more current to flow as it would have more room to move.
If you have a thick wire and small electricity what would happen?
the property of a wire to oppose the flow of current is called resistance and resistance is inversely proportional to A (area of cross-section of the wire). so, a small current also should be transferred without much loss.
What would happen to the coil if the current passing through it was too large?
If the current passing through the coil is too large, it can cause the coil to overheat and possibly burn out. This can damage the insulation on the wire and affect the coil's performance. It may also lead to a magnetic field that is too strong, affecting the intended function of the coil.
Would the force deflect the wire if you reverse the current ina current carrying wire in a magnetic field?
yes,it would
