You should start with the lowest magnification lens, typically the scanning lens (4x or 5x), to locate and center the specimen on the slide. This allows you to get a general overview of the slide before increasing the magnification with higher-power objectives.
The objective lens contains the lens with low power magnification in a microscope.
Yes, when using a compound light microscope, it is recommended to start with the lowest power lens (usually 4x or 10x) to locate and center the specimen before switching to higher magnifications. This helps in getting a broader view and making it easier to focus accurately at higher magnifications.
The total magnification of a microscope is calculated by multiplying the power of the objective lens by the power of the eyepiece lens. Given a total magnification of 200x and an eyepiece lens power of 10x, the power of the objective lens would be 200x/10x = 20x.
The lowest power of a microscope is typically 4x, known as the scanning objective lens.
Lowest power
The lens that you should use to first look at a slide on a microscope is a low power lens then move on to a higher power for more clarity.
You should start with the lowest magnification lens, typically the scanning lens (4x or 5x), to locate and center the specimen on the slide. This allows you to get a general overview of the slide before increasing the magnification with higher-power objectives.
Storing a microscope with the low power objective lens in place helps protect the lens and prevents accidental damage or contamination during storage. The low power lens is less delicate compared to other high-power lenses, making it a safer option for storage to ensure the microscope remains in good condition for future use.
The low power objective lens on a microscope is also known as the scanning lens.
On each lens of a Microscope there is a marking that states the magnification power.
the objective lens has the power of that lens inscribed on it
A microscope should be stored with the lowest-power objective lens in place to prevent damage to the higher-power lenses. It is recommended to keep the 4x or 10x objective lens in place for storage as they are less delicate than the higher magnification lenses.
The objective lens contains the lens with low power magnification in a microscope.
The coarse adjustment knob on a microscope should never be used with the high-power objective lens. This can cause damage to both the lens and the slide being viewed. Instead, it is best used with the low-power or scanning objective lens for initial focusing.
low power objective lens to locate and focus on the specimen before moving to higher magnifications.
lowest power, i think 40x