The weight of steel can vary depending on the specific type and grade. However, a rough estimate for the weight of 8mm diameter steel rod can be calculated using the formula: Weight = (Diameter^2) x 0.006165, where the weight will be in kilograms per meter.
The weight of a 40mm diameter mild steel (MS) pipe would depend on its length and wall thickness. A general estimate for a 40mm MS pipe with a wall thickness of 3mm would be around 3.27 kilograms per meter.
Area in sq. millimetre divided by 127 is the wt. of steel in Kilo Gram (Kg.) per metre length. e.g. 40mm wide flat with thickness 5mm = 40x5 =200/127 = 1.57 kg. 12mm Round bar will have are of 113.14 sq. mm divided by 127 the wt. will be by 0.89 kg. per. mt. length. by H.K. Dua
The formula to calculate the weight of a solid shaft is weight = volume × density × acceleration due to gravity. The volume of a solid shaft is calculated as π/4 × (diameter)^2 × length, where the density of the material and acceleration due to gravity are constants.
The standard weight of an RCC Hume pipe with a 600mm diameter and NP3 class is approximately 103 kg per meter.
5.33 is the weight of 12mm dia. bars.
8mm dia : 0.395 kg/m 10mm dia : 0.617 kg/m 12mm dia : 0.888 kg/m 16mm dia : 1.579 kg/m 20mm dia : 2.467 kg/m 25mm dia : 3.855 kg/m These are standard unit weights based on the density of steel @ 7850 kg/m3
0.62 kg/m is the unit weight of 10 mm dia, and you use the thumb rule for all other dia unit weight per metre = d*d/162 where- d is dia of bar/rod in mm
You forgot one important fact.... what material is it made of !
.4017
Rolling Margin is the deviation of actual unit weight to that of Standard unit weight as per IS Standards. Rolling Margin is calculated as : Sectional weight = Weight of Steel Bars dia wise / length of the bars. As per IS Standards unit weight of the Bars is calculated as dia x dia / 162 Rolling Margin is deviation of actual sectional weight to that of IS Standard unit weight. Standard Rolling Margin for different dia reinforcement bars used for construction purposes: 8mm to 10mm +- 7% 12mm to 16mm +- 5% 20mm & Above +- 3%
Dia X Dia X length X 7.8 / 1000000
Weight of pipe per Meter in Kg for MS Pipes = 3.14 * (Outer diameter of pipe in Mtr. - wall thickness in Mtr. ) * Wall Thickness in Mtr. * 7850
The weight of steel can vary depending on the specific type and grade. However, a rough estimate for the weight of 8mm diameter steel rod can be calculated using the formula: Weight = (Diameter^2) x 0.006165, where the weight will be in kilograms per meter.
A standard HSS drill bit in 12mm is all that's needed.
steel pipe 200mm per meter kg wait
6.314 kg/m