You can solve this in two steps. (1) Calculate the ball's volume. Use the formula for a sphere, and remember that the radius is 1/2 the diameter. Convert the result it either to cubic decimeters (= liters) or to cubic meters. (2) Divide the mass by the volume.
The volume of a sphere is given by V = (4/3)πr^3, where r is the radius (half of the diameter). Calculate the radius (3.75mm) and convert it to meters (0.00375m). Convert the mass to kg (0.001675kg). Using the formula for density (ρ = m/V), where ρ is density, m is mass, and V is volume, you can calculate the density of the steel ball.
The weight of a hollow MS (mild steel) pipe is determined by its dimensions and material density. You can calculate the weight using the formula: weight (kg) = (outer diameter - inner diameter) x inner diameter x length x density of MS. The specific density of MS used will affect the weight of the pipe.
The weight of a GI flat with dimensions 75x10 mm per meter length can be calculated as follows: 75mm x 10mm x 0.00785 (density of steel) = 5.8875 kg/meter.
A microscope slide is a thin, flat piece of glass that specimens are placed on for viewing under a microscope. It usually has dimensions around 25mm x 75mm and is used to hold the specimen securely and provide a clear background for observation.
To calculate the force, you can use the formula: Force = Pressure x Area. First, convert the diameter of the piston to radius (75mm). Then, calculate the area of the piston using the formula for the area of a circle (π x radius^2). Finally, multiply the area by the pressure to find the force.
The surface area of a single layer of gold atoms with dimensions of 1000 angstroms x 1000 angstroms is 1,000,000 square angstroms. This can be calculated by multiplying the length by the width (1000 angstroms x 1000 angstroms = 1,000,000 square angstroms).
The weight of a hollow MS (mild steel) pipe is determined by its dimensions and material density. You can calculate the weight using the formula: weight (kg) = (outer diameter - inner diameter) x inner diameter x length x density of MS. The specific density of MS used will affect the weight of the pipe.
A=πr2Plug in the radius. Do the math.
75mm diameter = .00441787 sq.m. .00441787 sq.m. x 350 m = 1.54626 cu.m. = 1546.26 litres
75mm = 7.5cm
The weight of a GI flat with dimensions 75x10 mm per meter length can be calculated as follows: 75mm x 10mm x 0.00785 (density of steel) = 5.8875 kg/meter.
To find the diameter, divide the circumference by pi75 ÷ 3.14159 ≈ 23.87 mmThen divide that by 2 to find the radius23.87 ÷ 2 = 11.935 mm
*
· The ranges of the sieve analysis applies between 75mm (3in.) and No.200 (75Mm) sieves.
75mm of rain is equivalent to 75 liters of water per square meter.
No, because it can't be elevated enough. A 75mm tank gun can be used on buildings in direct fire mode.
3"/75mm of sand over a solid level surface.
75 millimeters is 0.075 meters.