0
Add your answer:
Earn +20 pts
Do all ungrounded (hot) conductors have to be opened when controlling loads?
Yes, all ungrounded (hot) conductors should be disconnected when controlling loads to ensure the circuit is de-energized and safe for maintenance or repair work. This helps prevent accidental electrical shocks or hazards.
Is it poor conductor or a good conductor?
It is a poor conductor.
Is a staple a conductor or insulator?
A staple is typically made of metal, which is a good conductor of electricity. Therefore, a staple is considered a conductor.
Is gold a conductor or an insulator?
Gold is a conductor of electricity. It is highly efficient at conducting electricity due to its low resistance and high thermal conductivity.
What is the gender of a conductor?
The gender of a conductor is not specified by the role itself. Anyone, regardless of gender, can be a conductor.
What three colors are ungrounded conductors not permitted to be on a conductor?
White, grey, and green are the three colors that ungrounded conductors are not permitted to be on a conductor.
Why doesn't a multimeter read 120 volts between the hot ungrounded conductor and the floor which is the electrical ground?
"ungrounded" = floating.
What is it called when wires connect accidentally?
If two ungrounded (hot) conductors touch or an ungrounded and a grounded (neutral) conductor accidentally touch, it is called a short or short circuit. If an ungrounded or a grounded conductor touch an equipment grounding conductor, it is called a ground fault.
Why must a fuse always be connected in a non-earthed conductor?
It is the ungrounded conductor that carries the load current. It is that conductor that needs to be protected should a fault current occur. That is what the fuse in that circuit does.
What color is the ungrounded conductor in receptacle?
In most installations in a two wire circuit the colour will be black. In a three wire circuit there will be two ungrounded conductors using a colour code of black and red.
What Article and Section of the National Electrical Code allows the use of a white wire as an ungrounded conductor?
Nfpa 70 2008 nec 200.7 (c) 2
GFCI circuitry often checks for a difference in current between the ground and neutral?
A GFCI monitors the current in the ungrounded (hot) conductor and the grounded (neutral) conductor. If there is more than 6mA of current difference between the two the GFCI will open the circuit.
What is the first episode of Splaat Gets Ungrounded?
Splaat Gets Ungrounded For Nothing
What is The 2nd Episode Of Splaat Gets Ungrounded?
Splaat Ungrounds The Colored Splaats And Gets Ungrounded
What is The 3rd Episode Of Splaat Gets Ungrounded?
Splaat Goes Back To School And Gets Ungrounded
Can 1 0 wire be used for both hot wires and ground in a service entrance?
Yes 1/0 wire can be used for both ungrounded( hot wires) and the grounded conductor (neutral).
What is The 4th Episode Of Splaat Gets Ungrounded?
Splaat Behaves At Toys R Us And Gets Ungrounded
