0
In 1927, the Department of Commerce standardized the height and weight of mike bottles. The standardized weight of a quart sized milk bottle was 25.5 ounces. Different sized bottles, in different countries, and perhaps made of different materials would likely vary greatly in weight.
An empty milk jug typically weighs around 2-4 ounces, depending on the size and material of the jug.
Add your answer:
Earn +20 pts
How much does a 1 gallon HDPE milk jug weigh?
A 1-gallon HDPE milk jug typically weighs around 68-90 grams.
How much does a standard plastic 1 gallon milk jug weigh empty?
Nonfat milk is very close in density to water which weighs 8 pounds per gallon.
How much does a 1 gallon water jug filled with pennies weigh?
Pennies weigh about 2.5 grams each. There are roughly 181 pennies in a pound and 2,381 pennies in a gallon. So, a 1 gallon water jug filled with pennies would weigh approximately 9.5 pounds.
How much does a jug water weigh?
It varies from jug to jug but if you want to find out the capacity of your jug fill it up with water and then pour it into a measuring device.
If you have an 8 liter jug and a three liter jug bothe are unmarked You need exactly 4 liters of water How can you get it if a water faucet is handy?
Fill the 3 liter jug with water, then pour it into the 8 liter jug. Refill the 3 liter jug and pour water into the 8 liter jug until it is full, leaving 1 liter in the 3 liter jug. Now, empty the 8 liter jug and pour the remaining 1 liter from the 3 liter jug into the 8 liter jug. Finally, refill the 3 liter jug and pour it into the 8 liter jug, filling it up to 4 liters.
How does the milk bottle work?
There are several ways you could determine the capacity of a milk jug: 1: Fill the milk jug with water and then transfer the water to a graduated measuring jug 2: take a bottle of known volume such as a soda bottle. Fill the soda bottle and transfer its contents to the milk jug to get its approximate capacity 3: weigh the empty milk jug and make a note of the weight. Then, fill the milk jug with water. 1 cubic cm of water weighs 1 gram. Deduct the weight of the empty jug from the weight of the full jug to give the weight of the water inside. If, for example, the water weighs approximately 1000 grams then you have a 1 litre milk jug
How much does a 1 gallon HDPE milk jug weigh?
A 1-gallon HDPE milk jug typically weighs around 68-90 grams.
How much motor oil does a 1976 Honda cb 360 take?
probably about 2-3 quarts, what i do is drain oil into a pan then keep an empty milk jug around , dump oil into milk jug then you know how much came out. that's how much to put in then check level with dipstick or sightglass whichever you have, then add accordingly
How can you measure out exactly 3 liters of water with only a 9 liter and 7 liter jug?
Fill the seven litre jug. Empty into 9l jug. Refill 7 litre jug and empty into 9l jug. 7l jug now contains 5l, whilst 9l jug is full. Empty 9l jug. Pour contents of 7l jug into 9l jug. Refill 7l jug and empty into 9l jug. The remainder in the 7l jug will be 3 litres
How many liters does a milk jug hold?
You can get a 1 quart jug of milk or a 2 quart jug of milk
How many gallons are in milk jug?
There is 1 gallon of milk in the typical milk jug.
What do you do when your at 24 carrot island after you have the empty bowl?
well, you go to some supermarket and ask the woman to give some milk from the jug.
How much money in pennies will a half gallon milk jug hold?
A half gallon jug can hold about $25.00 in pennies. (:
How can you measure out half a pint using a 1.75 pint jug and a pint jug?
If A = 1.75 pint jug, and B = 1 pint jug 1) Fill 1.75 pint jug [then afterwards A = 1.75 B = 0] 2) From it pour 1 pint into the other jug [A = 0.75 B = 1.00] 3) Empty 1 pint jug, and into it pour the 0.75 pints [A = 0 B = 0.75] 4) Fill 1.75 pint jug again [A = 1.75 B = 0.75] 5) Pour enough (0.25 pint) from it to fill the 1 pint jug [A = 1.50 B = 1.00] 6) Finally, empty the 1 pint jug, and from the remaining 1.5 pints in the 1.75 pint jug, pour 1 pint of it into the 1 pint jug [A = 0.5 B = 1.00] So in six stages there will be half a pint in the 1.75 pint jug!
How much more water is needed to fill the jug to 1 liter?
To determine how much more water is needed to fill the jug to 1 liter, you first need to know the current volume of water in the jug. If the jug currently contains 750 ml of water, then you would need 250 ml more to reach 1 liter. This is calculated by subtracting the current volume from the desired volume (1000 ml - 750 ml = 250 ml).
How much is a one gallon milk jug filled with quarters only?
2000.00
How much does a 2 gallon water jug weigh without water?
0.5 pounds
