0
Add your answer:
Earn +20 pts
What limits the maximum counting speed of a ripple counter?
The maximum counting speed of a ripple counter is limited by the propagation delay of the flip-flops used in the counter circuit. As the count propagates through each flip-flop in series, there is a cumulative delay that increases with each stage. This limits the speed at which the counter can reliably count without errors.
what term describes the amount of charge that passes a point in a circuit each second?
The term that describes the amount of charge that passes a point in a circuit each second is current, measured in amperes (A).
Different types of passes?
There are various types of passes, such as day passes, seasonal passes, annual passes, and lifetime passes. Day passes provide access for a single day, seasonal passes typically cover a specific season or time period, annual passes are valid for a year, and lifetime passes offer unlimited access for the lifetime of the passholder. Each type of pass has its own set of benefits and restrictions.
When a wave bends as it passes from one medium to another what occurs?
When a wave bends as it passes from one medium to another, it undergoes a change in speed and direction due to the change in the medium's density. This phenomenon is known as refraction. The amount of bending depends on the angle at which the wave enters the new medium.
What occurs when light passes from water into a flint glass?
When light passes from water into a flint glass, it undergoes refraction due to the change in optical density between the two mediums. The bending of light at the water-glass interface is caused by the difference in the speed of light in each medium, leading to a change in the light's direction.
Do squares have a diameter?
No because squares have diagonals whereas a circle has a diameter.
Can a chord be in the middle of a circle?
Not sure what you mean by "in the middle of a circle". A chord must have each of its ends on the circumference of the circle. If a chord is such that is passes through the centre point of the circle, it is (the longest chord possible and is) called a diameter. Or to put it another way, a diameter of a circle is a chord which passes through the centre point of the circle.
What is ripple frequency-?
How often the ripple occurs i.e. times the ripple occurs per second. The ripple should be a repeating pattern. Figure out where the ripple repeats and measure how long each repetition takes. Measure this in seconds. The frequency is 1/Time where time is the time measured previously.
How does pressing the valves in a trumpet change the pitch?
there are holes/tubes in each valve, and as air passes through them different sounds come out when you change the path.
What is ripple carry output?
Each full adder inputs a Cin, which is the Cout of the previous adder. This kind of adder is a ripple carry adder. Al-firoz hossainCE-07002MBSTU.Bangladesh.
Why is a synchronous counter referred to ripple counter?
A synchronous counter is not referred to as a ripple counter. They are two different things. The ripple counter uses the output of each stage to trigger the input of the next stage, resulting in propagation delay between stages. The synchronous counter, on the other hand clocks all stages on the same clock edge, making them all change at relatively the same time.
Is chevron and ripple crochet stitch the same?
The same Crochet techniques will be known by different names. The chevron and Ripple are the same in crochet. Some will call this technique the Zig-Zag. Now there are variations of how deep and how curved the chevron and ripple are with each technique. If you go to YouTube and search for Chevron, Ripple, and Zig-Zag crochet, you will find the variations that go by Chevron, Ripple, and Zig-Zag , yet the technique is the same.
How many diameters is 9 meters?
A typical circle has an infinite number of diameters. Each diameter is a line segment that passes through the center of the circle and has endpoints on the circumference.
What is the radius and diameter of a circle?
The radius of a circle is a line segment joining any point of the boundary of the circle to its centre. A diameter is a line segment from a point of the boundary of the circle which passes through the centre and ends at the boundary on the opposite side.
Why you need to calculate ripple factor in terms of form factor?
Ripple factor and form factor both are inerrelated to each other since they represent the extent to which filtering is done(ripple) and rms value of ac is greater than the average value(form). ripple factor=Vr(p-p)/V(dc) form factor=V(rms)/V(av)--Jivan Nepali
What is Pokemon Battle Revolution about?
it is a wii Pokemon game. you can get passes which let you go multiplayer/twoplayer because passes are like characters that have six Pokemon each. you can also customize passes to have different Pokemon or change the character You can either use CUSTOM PASS or PASS. Hope it helped enjoy
How does the altitude of the noontime sun change as winter approaches?
It will be lower in the sky. As the midpoint of winter passes, the noontime sun will be higher each day until midsummer.
