To convert from dB (decibels) to mW (milliwatts), you can use the formula: mW = 10^(dB/10). Simply take the dB value and divide it by 10, then raise 10 to that power to get the mW value. For example, if you have 20 dB, the calculation would be mW = 10^(20/10) = 100 mW.
To convert power in watts to decibels (dB), you can use the formula: dB = 10 * log10(P2/P1), where P1 is the reference power (usually 1 watt) and P2 is the power you are converting (40 watts in this case). Plugging in the values, you would calculate: dB = 10 * log10(40/1) = 16.02 dB.
You cannot directly convert hertz (Hz) to decibels (dB) because they measure different quantities. Hz measures frequency, while dB measures the level or intensity of a sound signal. To get dB from Hz, you would need to measure the intensity or power of the sound and then calculate the corresponding dB value using a reference level.
To convert from dB HL (Hearing Level) to dB SPL (Sound Pressure Level), you typically need the specific audiogram for the individual. Once you have the individual's threshold values at different frequencies, you can use them to make the conversion. Each audiometric frequency has a specific conversion factor to convert from dB HL to dB SPL. It is not a direct and consistent conversion across all frequencies.
To convert sone to decibel, you can use the formula: Decibels (dB) = 40 log(sone) For example, if the loudness level is 4 sones, the equivalent decibel level would be 40 log(4) ≈ 60 dB.
Well, the question your asking is basically impossible. It's like asking to convert a gallon of water into cans of pop. It is possible to convert the gallon of water into cans of water not soda. So you can convert dBm to watts, not dBi.
Well, the question your asking is basically impossible. It's like asking to convert a gallon of water into cans of pop. It is possible to convert the gallon of water into cans of water not soda. So you can convert dBm to watts, not dBi.
How do I convert a .db file?
If I understand the question, it isn't possible to convert dB (a unit of sound energy) to litres (a unit of volume).
The Yagi array allows a significant increase in antenna gain (expressed in dBi or Db over isotropic) by the simple addition of parasitic elements to a dipole or folded dipole.
To convert from dB (decibels) to mW (milliwatts), you can use the formula: mW = 10^(dB/10). Simply take the dB value and divide it by 10, then raise 10 to that power to get the mW value. For example, if you have 20 dB, the calculation would be mW = 10^(20/10) = 100 mW.
It is impossible to convert dB to dBA. There is only a guess. Scroll down to related links and read "Correlation between sones und phons".
To convert power in watts to decibels (dB), you can use the formula: dB = 10 * log10(P2/P1), where P1 is the reference power (usually 1 watt) and P2 is the power you are converting (40 watts in this case). Plugging in the values, you would calculate: dB = 10 * log10(40/1) = 16.02 dB.
0 dBrnc=-90dBm (1000Hz Toned)
You cannot directly convert hertz (Hz) to decibels (dB) because they measure different quantities. Hz measures frequency, while dB measures the level or intensity of a sound signal. To get dB from Hz, you would need to measure the intensity or power of the sound and then calculate the corresponding dB value using a reference level.
dbi
Dont Beg It :)