0
To calculate the intermediate frequency (IF) for a radio receiver at 70 MHz, you typically choose a fixed IF value such as 455 kHz or 10.7 MHz. The IF frequency is chosen in such a way that when the desired signal frequency (70 MHz) is mixed with the local oscillator signal, it falls within the receiver's bandwidth for demodulation. This allows for effective filtering and processing of the signal at a manageable frequency before demodulation.
Still curious? Ask our experts.
Chat with our AI personalities
Ezra
Professor
CoachAdd your answer:
Earn +20 pts
What is the velocity factor for rg58u coaxial cable?
The velocity factor for RG58U coaxial cable is typically around 0.66 to 0.70, which means that signals propagate through the cable at approximately 66% to 70% of the speed of light in a vacuum. This factor is important for determining signal propagation delay and matching impedance in RF systems.
What is the number of vibrations that occur in one second?
That depends on what kind of a system the local oscillator is part of. In a simple AM receiver, it's typically 455 KHz above the frequency of the incoming signal of interest. In a consumer FM radio, that figure is 10.7 MHz above. In a 'legacy' analog microwave receiver, it's almost always spaced 70 MHz from the received carrier, and since the ubiquitous advent of split-mount digital microwave equipment, with the RF system clamped to the antenna, there's no telling any more ... you always have to look in the book (if that information is even included in the book).
How do you Calculate the acceleration of a 70-kg mass on a swing if you push it with a 40-N force?
You can calculate the acceleration of the swing's mass by dividing the force applied to the swing (40 N) by the mass of the swing (70 kg). This would result in an acceleration of 0.57 m/s^2.
Expected frequency for a person having tongue rolling ability and attached earlobe?
The expected frequency would be determined by calculating the probability of someone having both traits based on their individual frequencies in the population. This would involve multiplying the frequency of tongue rolling ability by the frequency of attached earlobes in the population. For example, if 70% of the population can tongue roll and 60% have attached earlobes, the expected frequency would be 0.70 x 0.60 = 0.42, or 42%.
Calculate the acceleration of a 70-kg mass on a swing if you push it with a 40-N force.?
To calculate the acceleration, you can use the formula F = ma, where F is the force applied, m is the mass, and a is the acceleration. Rearranging the formula to solve for acceleration gives a = F/m. Plugging in the values, a = 40 N / 70 kg = 0.57 m/s^2.
