Depending on condition of course. 3 boxes and taken care of $2200 easy. Dont let anyone tell you differently. These guns are extremely rare and people will tell you they are far less with the intent of making people think that are not as valuable as they are. As time goes on of course, they become more and more valuable. These were "working" guns for those serious about accuracy etc... Because of this very few of them are in excellent condition.
Chat with our AI personalities
A second class lever has the fulcrum located at one end, and the load between the fulcrum and the force. A wheelbarrow is an example of a second class lever. The mechanical advantage is the ratio of the fulcrum to load distance and the fulcrum to force distance, so you wind up moving the force through a greater distance than the load. This gives you a positive advantage, at the cost of greater movement.
Both second class levers and third class levers have the load placed between the fulcrum and the effort applied. They both require effort greater than the load to be lifted.
The mechanical advantage of a second class lever is always greater than one. The mechanical advantage of a first class lever ranges from 1 to infinity.
The forces in both move in the same direction as the load. Also, the fulcrum is on the end of the lever in both.
Hopefully this helped......... :-) :-) :-) :-) :-) :-) :-) :-) :-) :-)
Second class levers have the load between the fulcrum and the effort (load-fulcrum-effort), while third class levers have the effort between the load and the fulcrum (load-effort-fulcrum). Second class levers provide mechanical advantage and are more efficient for lifting heavy loads, while third class levers provide a speed advantage but require more effort.
The distinguishing characteristic of first-class levers is that the fulcrum lies between the effort force and the resistance force. Second-class levers have the resistance force between the fulcrum and the effort force. Third-class levers have the effort force between the fulcrum and the resistance force.
There are three basic types of levers: first-class, second-class, and third-class. These levers differ based on the placement of the fulcrum, effort, and load.
Levers can be found in various systems such as tools, machines, and human body. There are three types of levers based on the relative positions of the fulcrum, resistance, and effort: first-class lever, second-class lever, and third-class lever. Examples include seesaws (first-class), wheelbarrows (second-class), and shovels (third-class).
There are three classes of levers: first-class, second-class, and third-class. These classes are based on the relative positions of the fulcrum, effort, and load.